davidwalker
02-16-2005, 11:31 AM
Well for the time being I'm going to sell the turbo kit off my car, and leave the 6m in my car. Read everything below that's included in the kit.
1) Stock Ct-26 in good shape
2) Manifold already grinded where needed ready to be put on the motor
3) Rabidchimp stainless oil feed/return line
4) MK3 stock intercooler
5) MK3 stock intercooler piping
6) Custom 3" hose and piping to go from AFM to Turbo inlet
7) Turbo elbow/ and a piece of downpipe cut off after flex joint so you can get your own exhaust made.
8) BEGI RRFPR http://www.bellengineering.net/Pages/products_FPR.html
#2025.
9) MSD 6A BTM with all rev limiter chips, MSD tach adaptor. ALso I will give the plate I have it all mounted to that way it will bolt right up for you.
10) Toysport 3"intake pipe
11) All heat shields
12) Coolant lines (I ran around the back of the motor using brass lines, I'll send if you want or not).
13) Mk3 stock BOV.
Everything is in perfect working order and is ON the car now. I can take any pics you would like or a short video of the car running as well, or boosting down the road or whatever. Just let me know exactly. Please email me directly @ davidwalker@cableone.net or PM me. I'm located in Texarkana, TX 75501. This Kit IS COMPLETE. The only thing you'll have to do is make a pipe to go from fender to Toysport intake, get exhaust work done, and guages. For $1150 I'll ship anywhere in the US. If I've left anything out or you have questions just let me know. I still have the receipt for the RRFPR for $259, and receipt for MSD tach adaptor and 6AL BTM for over $300. For what it's worth I will also give any kind of tech support I can to the buyer. This is all pretty much just bolt up and play though. I can accept paypal or will take US money order. Thanks alot guys.
1) Stock Ct-26 in good shape
2) Manifold already grinded where needed ready to be put on the motor
3) Rabidchimp stainless oil feed/return line
4) MK3 stock intercooler
5) MK3 stock intercooler piping
6) Custom 3" hose and piping to go from AFM to Turbo inlet
7) Turbo elbow/ and a piece of downpipe cut off after flex joint so you can get your own exhaust made.
8) BEGI RRFPR http://www.bellengineering.net/Pages/products_FPR.html
#2025.
9) MSD 6A BTM with all rev limiter chips, MSD tach adaptor. ALso I will give the plate I have it all mounted to that way it will bolt right up for you.
10) Toysport 3"intake pipe
11) All heat shields
12) Coolant lines (I ran around the back of the motor using brass lines, I'll send if you want or not).
13) Mk3 stock BOV.
Everything is in perfect working order and is ON the car now. I can take any pics you would like or a short video of the car running as well, or boosting down the road or whatever. Just let me know exactly. Please email me directly @ davidwalker@cableone.net or PM me. I'm located in Texarkana, TX 75501. This Kit IS COMPLETE. The only thing you'll have to do is make a pipe to go from fender to Toysport intake, get exhaust work done, and guages. For $1150 I'll ship anywhere in the US. If I've left anything out or you have questions just let me know. I still have the receipt for the RRFPR for $259, and receipt for MSD tach adaptor and 6AL BTM for over $300. For what it's worth I will also give any kind of tech support I can to the buyer. This is all pretty much just bolt up and play though. I can accept paypal or will take US money order. Thanks alot guys.