Part numbers for wrap around indicators

[jeremyisme]

I have an 83 MkII, and it has jsut the front indicators, not the wrap around, and i am going to change it to the wrap around ones, but does anyone have the part number for them? Just so i dont have to go into each place to see what they have. (btw, hopefully people know what i am talkilng about)

[suprasrock]

LH 81521-14280
RH 81511-14280

These are European numbers, don't know if they're the same down there.

You do realise they're not a straight swap though, don't you?

[jeremyisme]

Yeah, i am getting a new bumper too. Thats all that i need right? as the driving lights will fit?

[CJSREDPRA]

No.....

On one end of the wrap-around turn signal housings, you will see something sticking out that looks like a little metal ball. This attaches to a plastic/nylon clip. And guess where that clip attaches to????? Surprise!!!! This clip ALSO attaches to the foglight housing bucket that is part of the 84/86 nose.. So yes, the foglight housing bucket that is behind the housing itself, is different between the 82/83's & the 84/86. The clip does tend to break after awhile, but sometimes (depending on fitment) one end of the wraparound housing will be "loose". And it will be the end where it meets the foglight.

Something else to ponder......

[jeremyisme]

Umm, so I need new foglights and indicators, and bumper? Hehe, sorry, I am having trouble trying to visualise your explanation, cos I dont have the new bumper yet.

[CJSREDPRA]

You won't need the foglight trim rings & the housings themselves... Just the "buckets" that the trim rings & the housings attach to....

Basically, the wrap around housings won't attach to the 82/83 foglight housing buckets, because of the different design of the "housing" The 82/83's just have the front turn signal housing on the corners, while the side marker lights are on the fenders. 84/86, this was all integrated together, thus there are design changes that you cannot see from the outside, unless you start to pull stuff off.