PDA

View Full Version : energy suspension motor mounts


skeen550
03-16-2005, 01:36 PM
I modified a set of these and put them on, they of course worked great but I dont like the harshness so I put my stock back on.

I paid $50 for the set at AutoZone 2 months ago.

They will fit the mkii supra with a 5m or 7m.

I will take $35 for both plus shipping cost.

my zip is 76574 in the Austin TX area.

I will post some pictures tonight.

Scott
TRD 83 SUPRA XX
03-16-2005, 03:31 PM
PICs?
ma615mgte
03-16-2005, 07:46 PM
I will post some pictures tonight.

Scott

:roll:
Chrisfrom1986
03-16-2005, 10:17 PM
I will post some pictures tonight.

Scott

:roll:
:lol:
skeen550
03-16-2005, 10:20 PM
Not real great shots, my camera stinks at close ups.

http://tinypic.com/28t94l



http://tinypic.com/28t9c4
skeen550
03-22-2005, 06:09 PM
bump, anyone interested ?
Daves2JZGTE
03-22-2005, 08:13 PM
are they sold as is in pics with the brackets?

Dave
skeen550
03-22-2005, 11:29 PM
there are no real brackets that you add.

The stock GM trans mount lines up perfect, I just had to grind the 2 corners off to fit the little ears on the crossmember mount side and then I welded washers to space the mounting point up so the mount has the proper pre-load when its bolted down.

The stud is a grade 8 as well as the nut and washer, so they are way stronger than stock. They are very stiff, not as harsh as solid steel mounts but the engine does not move any at all that I could tell.

Scott
skeen550
03-23-2005, 10:19 PM
Looks like Supra Bob has got them.

We are closing the deal shortly.

Scott