Assortment of things, SoCal (you can call it xmas)

[KesekiSupra]

Ok, i got an assortment of things here, all for dirt cheap, or practically free, just shipping and like maybe $5 on top of the shipping for gas spent on getting these parts heh.

Vacuum Distributer: (for early model) i have 1 whole one (cap and rotor included, $10 + shipping) and one minus cap and rotor, $5 plus shipping

stock flywheels: 2 , 10 bux plus shipping as well

iscv: (not sure if different between early and late models) free just pay shipping

Starter: 5 bux plus shipping

Shifter assembly: 2, $5 each plus shipping

P.S Pump + resevoir: $10 plus shipping

early coil + ignitor: $5 + shipping

early coil: free + shipping

Late coil: free+shipping

late coil + ignitor: $5+shipping

tranny support: free+shipping

oil pan: $5+shipping

fan shroud: free+shipping (maybe a pain to ship, anyone got any ideas how to ship one if i got no local pickups? such an odd size to ship)

washer resevoir + two pump motors: free+shipping

fuel rail + injectors: $10+shipping (no clue on condition of injectors)

i have other things, needa figure out wat they are if even for our cars first. ill take pix and let u guys look and tell me wth they are.

Also, i have two diffs for sale, but ONLY local pickup, i dont really wanna ship them.

one is a 4.10 and the other is a 4.30. both selling for $50

edit: both diffs are LSD

http://img.photobucket.com/albums/v311/Keseki/DSC00075.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00074.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00073.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00072.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00071.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00070.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00069.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00068.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00067.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00066.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00065.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00064.jpg

These next three pix are the parts i dont know of. I dont know where or wat they are/ belong

http://img.photobucket.com/albums/v311/Keseki/DSC00063.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00062.jpg

http://img.photobucket.com/albums/v311/Keseki/DSC00061.jpg

[KurtW85]

I mite need the late coil + ignitor for my 85. Follow up on my Thread in General Tech to find out for sure. I could have my friend pick it up for me.

[**lame_screename**]

What condition are the diffs in? Bearings? Lash? I'm in San Luis Obispo and could drive down to pick up.

[KesekiSupra]

no idea on the condition of the diffs, i haven't opened them, but the LSD still works since both sides spin in same direction, if thats enough help for u, lol.

[KesekiSupra]

bump

[Zed_Yakuza]

interested in the oil pan and fuel rail + injectors. would you ship to South Bend Indania? (46614) Thanks.

[KesekiSupra]

bumparoo

[**lame_screename**]

Sorry, school is kicking my ass. Email sent.

[**lame_screename**]

Pix?

[KesekiSupra]

pix of the diffs? ill post pix of everything as soon as i have the time. i might actually post them up later today/tonight. i even hafta take pix of the stuff i dunno wat they are (lol)

btw, look at my location lame screenname ;) (to answer ur email lol)

[Chrisfrom1986]

crap, i thought the resevior you were giving away was the radiator res. got one of those for free + shipping?

Bump

[KesekiSupra]

unfortunately no, i dont, sorry =\

[toyotaman5mge]

I could use the oil pan and one diff. I can send it with menlo they ship to my work all the time.. let me know what you want for the 4.11:1. thanks man.. I would pay for the shipping for both.. let me know.

[KesekiSupra]

if i dont hear from Zed soon, the ur next in line for the oil pan, as far as the diff that was called first by lame screen name. i wanna be fair, first in line gets first chance.

[KesekiSupra]

bump

[KesekiSupra]

still got this stuff for anyone to buy, minus fuel rail and oil pan

[Nukes25]

how much would a flywheel cost to calgary, ab canada, t1y 4g9?

[**lame_screename**]

School is still reaming me, but I'm out in two weeks so I'll probably have time to drive down and check out the diffs then.

[KesekiSupra]

uhh im not sure wat t1y 4g9 means. is that sum sort of...like postal code? im not sure how much shipping would be, i needa weigh the flywheel and the get the dimensions of the box ill ship it in, then ill figure out the shipping cost for u ASAP. i got nothing but time tomorrow. lame screenname, dont worry, the diffs will be here ;).

so yea, just gimmie the zip code/postal code (or watever you guys up north have) and ill check it out as soon as i can and get back to you

[kpaske]

I am searching for the following parts. Maybe you have some of them (to fit an 84 Supra):

- The elbow that comes out of the tranny, that the speedometer cable plugs into.
- The driver's side rear-view mirror and parts to attach it to the mirror assembly
- The passenger side clear fog light lens cover
- Left and right panel/covers for the small triangular section on the front of the door
- Driver's side kick panel

Please send email to kpaske at hotmail dot com if you have any of these! Thanks...

[CJSREDPRA]

uhh im not sure wat t1y 4g9 means. is that sum sort of...like postal code?

This is a Canadian zip code. Have you ever sent stuff to Canada before???? No you say???

Cheapest way to send it, is via US Postal service. Get prices for Global Priority & Parcel Post Air (cheaper). If it's something really heavy, look to sending things Parcel Post ground. Don't forget to fill out a Customs Form. There is the small one that has a Green colored section to fill out on the left. THIS is the form to use if the box is under 5 lbs. If it's over 5 lbs, or if the box is under 5 lbs, but you are insuring it, you get to fill out the "other" Customs form (the one you have to press hard, because you are making 4 - 5 copies.

Don't forget to ask the buyer what he wants the item value set to on the Customs Form. The more expensive it is, the more the buyer will be dinged for import duties, taxes & other crap. DO NOT use UPS to ship to Canada, there are a few other "hidden" fees that the buyer will get dinged for (I believe it's a Brokers Fee). Can't remember if this is a problem w/ FedEx or DHL.

If all else fails, re-read this again: http://www.celicasupra.com/vbforums/showthread.php?t=12044

Wait till you send stuff to Australia... Postal Code only has 4 numbers. :D

[KesekiSupra]

Kpaske: sorry, i only have the DRIVERS side fog light. thats about the closest i am to having any of those parts

CJSREDPRA: oh boy...this is gunna be fun? Well as long as Nukes25 can bear with me and possibly huge time delays, I'll have no problem shipping it, just gotta remember, this is my first time and all I'm an international shipper virgin (rofl)



was reading that site, and was reading wat silvermk2 said, USPS is a bit risky since they can loose the package...FedEx is good but its expensive, prolly same with DHL, oh well, up to buyer, ill send it with whoever he wants.

[Nukes25]

I've had stuff sent usps before, and I've had no problems receiving, so that would work fine, and like cjsredsupra said, on the customs declaration form, you give a value for it, but there is also this nice little box marked gift, that waives the customs duties, ect, I'd have to pay, its really nice :)

[KesekiSupra]

im catching what you're throwing ;) its practically a gift anyways, selling it so cheap lol

[TOYMAN321]

I'll take a shifter assem., also do you have a alternator in good shape??

[KesekiSupra]

actually...i do...it even has a warranty with autozone (im sure u can get the warranty if u just use my info perhaps) its the stock 65 amp alt, ill sell it for 50 bux. would u wanna come pick them up instead of me shipping them? would save u all a lot of money

btw for the rest of u guys that pm'd me or posted here about stuff to send out, ill get to it tomorrow in finding boxes to ship them in , weighing them, and getting the shipping cost for u guys. just letting u know im trying to get this stuff handled asap. i try to be a good merchant ;)

[TOYMAN321]

Yeah I'd be able to come pick it up, Im actually going to be up in Long Beach this Saturday if you are available then.

[KesekiSupra]

yea saturday is fine, just has to be either before 12 or after 7pm =\ i work from 12-7.