CT-26 wastegate???

[MKIIBeater]

So what kind of boost levels are all you turbo guys running? What is the stock boost level that the wastegate actuator is set at? I hope its less than 7-8psi cause I don't want to be running a lot. If it is higher what do you do to lower it?

[CRF_Rider]

I believe mine is around 6-7 without the wastegate shimmed.

[82TURBOSUPRA]

Running a RAYJAY external wastegate set at 10 psi but run 15 psi using a Cartech boost controller.

[thshiiam]

Before my headgasket blew mine ran 7psi.

[MKIIBeater]

Well this is all good news... I guess Ill just leave the stock actuator to do its own thing then, no BC needed 8)

[Racefiend]

with the wastegate unmolested, I ran just under 6psi

Christian

[MKIIBeater]

This is all good news. Thansk guys! I was worried Id have to Modify the wastegate a bit.... Im also surprised, I would have thought that the stock 7M's woudl be running a bit more than 6-7psi :?

[82Spearco]

I believe that a stock 7mgte with the ct26 runs 5.5psi.

[ma61_turbo]

AFAIK stock boost for the auto 7m is around 5.5-6psi. I think the manuals are about 7psi.