jdk_ii
09-07-2005, 10:51 AM
I need a picture of a stock AC compressor in the engine bay.
(installed, of course).
Two pics required:
One with center focused on the AC compressor attachment lines.
I need include the
2nd pic of rear section of compressor (basically, stand at the shock tower
and focus on rear of compressor).
The Project Frosty compressor needs to be moved up vertically about 1/2" inch.
For reference, I have the compressor adapter plates designed for the 7M.
They are 1/2" thick. This outward offset allows some flexibility to move the compressor up about 1/2".
This will make the adapter plate an easy bolt on, then bolt on the compressor.
I obviously want to do the same for the 5M.
Thanks.
(installed, of course).
Two pics required:
One with center focused on the AC compressor attachment lines.
I need include the
2nd pic of rear section of compressor (basically, stand at the shock tower
and focus on rear of compressor).
The Project Frosty compressor needs to be moved up vertically about 1/2" inch.
For reference, I have the compressor adapter plates designed for the 7M.
They are 1/2" thick. This outward offset allows some flexibility to move the compressor up about 1/2".
This will make the adapter plate an easy bolt on, then bolt on the compressor.
I obviously want to do the same for the 5M.
Thanks.