PDA

View Full Version : Electronic Boost Controllers



82Spearco
07-14-2003, 11:10 AM
I am looking to purchase an Electronic Boost Controller. In the past, the HKS EVC IV was recommended. In poking around Ebay, I found a dual solinoid Blitz unit that looked promising, but no EVC IV's. I would like to find something that will work well, but also won't break the bank. Any suggestions/recommendations? Thanks.

CRF_Rider
07-14-2003, 11:15 AM
Here is the one I just got:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=33742&item=2422670188

I love it. The only thing I dont like is that only reads in metric units. Other than that it is great.

Daves2JZGTE
07-14-2003, 02:59 PM
i got a evc 3 and its almost the exact same as the 4 the max boost is difrent the 3 gose to 30 and the 4 gose to 40 or 45 psi the only other difrence is the look. i love my evc 3. Dave

williamb82
07-14-2003, 04:45 PM
i got my evc3 off ebay for $152. i love it. if you look on ebay the evc 3's are cheaper then the evc 4's and have pretty much the same features. it has the scramble boost control button and has the port for the external switch to activate it. only thing is the boost is limited to 29.4psi i think the evc 4 goes to ~40psi. also, i found a site that has the install book for the evc3 in english.
william

ma615mgte
07-14-2003, 10:02 PM
ok.. im still new to the turbo phase here.. what does it do.. and help.. does it react on the fly??

82Spearco
07-18-2003, 03:12 PM
Shopped around for a while and finally decided to buy a Blitz SBC Spec R boost controller. Should be more than adequate for my needs.