Parting out 84 P-Type.

[Kevin Kisseberth]

The car is a 5-speed grey leather. Seat ,dash carpet is shot. The center console itself is in fair condition. The entire interior is ready to be sold. Tell me your needs . The quarters and sunroof are rusted. The engine I am not parting it up. Car has 151000 miles

I have 4 p-type seats that are grey (fair leather)
fogllights/taillights/turnsignals/wireharness
every black plastic moulding in the car

The car is stripped from the roof to the floor pans.
I have not stripped the dash yet but will soon so anything needed please ask soon . Thanks

[sarinas_dragons]

What the... I was still trying to decide to see if you wanted to trade my flippin' whiskas for somethin'. Now the tables are turned. Can the back seat donate material for front seat repairs? And how are the door panels?

[Kevin Kisseberth]

Door panels are good the pockets are sagging a little. What the heck do you mean on your post? Have no idea what your talking about.

[sarinas_dragons]

My bad, I assumed that one you mentioned in the wanted section. Thought it was the same car.

[discoelk]

color/condition of the steering wheel? Pics?

[jefe_not]

I need the two levers for the gas and hatch beside the drivers seat. All I've got are the wires...

[Kevin Kisseberth]

black with grey leather,black steering wheel is worn like most

[Kevin Kisseberth]

sarinas what exactly do you need

[RedP85]

Kevin, I don't recall the color arrangement in an 84 black/gray leather...
On the rear left panel, below the window, is it black on top,
gray in the center, as in the pic below, without cracks ?
http://i4.photobucket.com/albums/y108/Redp85/RRquartertrim.jpg
Interested if in excellent condition.

[Kevin Kisseberth]

yes it is that

[sarinas_dragons]

I need the front door panels.

[Kevin Kisseberth]

Red the pieces you mentioned they look great but of course there is a half inch rip in the black part of the rear trim that you pictured

UPDATED MAIN POST

[RedP85]

there is a half inch rip in the black part of the rear trim that you picturedSame as mine then.. :sadsmilie
Thanks anyway !

[Kevin Kisseberth]

Not a problem, I thought they were perfect until I saw that tiny cut.

[odamadude]

do you have the p-type spoiler?

[Kevin Kisseberth]

Oh yes I have the two part rear spoiler off an 85 -86. I that what your looking for? Kevin

ENGINE COMPERTMENT PARTING OUT
ALSO EVERYTHING IN DASH AND BEHIND IT
Hey before the winter hits which it alredy has pretty much any parts .
I am starting after pulling apart the dash and everything there every vent and everything I am on my way to the engine compartment. The only thing I am not doing is taring apart is the engine itself. It runs and i will use it eventually so everything around it in the engine bay is up for grabbs. I know many things behind the dash are rare to need and also to save so anything needed just ask soon. All the stuff has to be put away for the winter so if you need it please ask now so I dont have to go in the attic to find it. Thanks Kevin

I also have alot of blue interior piece that is from another parts car. Inquire needs!

[Kevin Kisseberth]

WOW I thought these parts would go Oh well goota get rid of this so I put some things on ebay if you guys want some pictures. Its under 82 - 85 toyota supra

[ritua1313]

I need a hood, header panel, almost the entire front end and brackets. God damn deer!! I live in Williamsport PA, go to school in Blairsville PA (hour from Pitt) but one of my roommates actualy lives in NJ. I am not exactly sure where but I am sure I could make a road trip with him. How much would you want for the hood (need that the most)

[turbogoo1]

Ok, how much for the flares and rad? Is the rads flaking the fins yet?

Maybe we (meaning ritual and my self can work together to get the parts....meaning if he has the transportation, and willingness to get) I will pay for part of it to come back.

Also how is the hatch?. If ritual doesnt want the front bumper, might take that too.

[Kevin Kisseberth]

ritual the hood is free. There is rust on the inside but the outer part looks perfect. The fornt parts you would have to show me a picture of exactly waht pieces you need. the header panel is $30 it does have a little bodywork on it. I live 40 minutes east of Trenton Great Adventure Amusement Park

[Kevin Kisseberth]

Turbogoo the rad is $15 there is about a 3 inch part that has some flaking. The front bumper is $65 and the flares are $25 a piece

[Kevin Kisseberth]

Front bumper is off and ready for shipping but have not heard from you in some time.So its up fro sale along with every other part of the car

[Darrow]

how much for the ecu?

[2UPK321]

How much for the flares shipped to 94606 Oakland CA?

[batmobile]

`1

[Kevin Kisseberth]

Yes I made especially sure that the harness was taken out properly. This harness is 100% complete with door and hatch harness. The entire car. Hey bat you want an auto this is a 5-speed

[scorpmatt]

how much for both the headlight assemblies, including motors?

[batmobile]

`1

[spamalope]

Do you have the wiper control box and sunroof cables available? if so let me know, Thanks!

[Kevin Kisseberth]

Yes I do

[suprasunlimited]

hey kevin, i already bought some stuff from you and wondering wether you still have any of the hatches you showed me, and if you happen to have any other doors, or maybe the front bumber cover off this car you are selling, oh and do you know if the 84 rear tail lights will match an 82, and if not i guess i could use one for my 85 p-type. if its easier for you to give me a call 973 390 0516

[Kevin Kisseberth]

Yup got everything plus more

[chassisb0t]

if you feel like taking off the fuel lines that connect to the tank, pm me i would buy

[Kevin Kisseberth]

Fuel lines were pretty shitty so I would not sell them because of the condition Sorry !

[chassisb0t]

np

[mk2rookie]

need 5sp tranny how much shiped to 33463

[Kevin Kisseberth]

I have a for sale thread with a list of items. I do have the trans. You can search around for a price on shipping if you are interested. Shipping is from 08527. If you can find a price to ship it that you are interested in let me know what I have to do . Thanks Kevin

[Kevin Kisseberth]

Also I have got the motor out and I am parting out the car and the motor is now available. Thanks

[Chrisfrom1986]

d shaped runners? price if so please.

[Kevin Kisseberth]

Hey Chris I heard of d-shaped runners now what are they. Also I just bought another 84 parts car. Its the intake manifold but what are the ports d-shaped?

[SilverMk2]

The later manifolds have the runners transistion to a D shape up to the plenum. You can see it in this picture;

http://www.pbase.com/silvermk2/image/36642565.jpg

The easy way to tell is the EGR location mounts.

[Kevin Kisseberth]

Hey silverMk2 two things. I hate you ! Could you become my neighbor. Wow that motor is and looks awesome. So yes I am jealous but if you become my neighbor you and I can build another. Shit I hate being poor. looks great and thanks for the reply for the help ! I still hate you though .

[SilverMk2]

Actually its not that hard or expensive. Just clean everything, paint what needs to be painted, and bead blast all the aluminum.

[Kevin Kisseberth]

Looks great ! I am anal. That is my dream to have a motor to look like that. Nice work, real nice. You want to be my neighbor? Please!

[davidmiz]

hey kevin do you have the belt mouldings on the rear quater panels in front of the tire well im right in lakewood if you can hold them for me i will come pick them up also i have been seeing a white 85-86 around is that yours i still have your number let me know if you have them so i can come pick them up thanks david oh and let me know asap becuse next weak i am going for sugery on my leg from that damn car accident like 8 monthes ago

[Kevin Kisseberth]

Yes I have them. Give me a call

[MOUNTJULIET]

do you still have front bumper and if how much to ship to zip-37122

[MOUNTJULIET]

85 p type 6mgte sds em4 440cc 8psi

[MOUNTJULIET]

do you still have bumper and if how to ship to zip 37122

[Kevin Kisseberth]

I have the bumper but really have no idea how to ship it sonce its oversized through UPS They charge oversized package weight also so they say its 70lbs. I can give you an estimate soon but its only an estimate until I box it up when i can find a box that size. I will get back to you soon. Thanks

[Kevin Kisseberth]

Well I went to UPS and they want for 60" by 15" by 15" weighing 30 lbs from 08527 they want $142.00. Do yourself a favor and you can try to get a price. Put your measurements in I guessed somewhat but I think I am VERY close and ship it from 08527. Use whatever company you want and I will ship it out through them at whatever cost they say. Thanks

[Kevin Kisseberth]

Okay I still have everything with an 84 manual plus an 85 auto. Just Pm your needs since I have everything on shelves and ebay wants a fortune on little shit. Ebay is a joke for what they get. I just want to sell this stuff since my storage is getting/filled. Read all my threads and I do need to get rid of this stuff due to getting another parts car I have not gotten into yet. I do need to sell this stuff so the cars were gutted to the bare bones so just ask. I have motors and many plastics to get rid of. Thanks for reading just ask what you need. Thanks

[Gage006]

Got a passenger side tail light and drivers side visor in grey? (84/85 style) shipped to 95350

[Kevin Kisseberth]

Tails are sold and the visors I have are beige and blue. Sorry no grey