MegaSquirt using stock coolant sensor...

[BillyM]

Ok cheappower, give us the down-low...

Do you have an uploadable sensor calibration file that we can just load up, or a spreadsheet we can import? ...Gimme tha good stuff!!!!

--BillyM

[Darrow]

Try this. I know it is not in a spread sheet but you can put it in one.
http://www.cygnusx1.net/supra/library/TSRM_MKII/fi/FI_072.html

[drftsupramk2]

great to see this sub/duaghter forum on board.

[cheappower82]

linuxman51 did the easytherm setup for coolant; i'll have to ask him how it works

[sarinas_dragons]

awesome

[supra_toy]

So I'm to take the stock toyota coolant sensor can be used with MS?

will

[cheappower82]

yes

[BillyM]

Do you think you boys can upload us a config file? I'll understand if you guys wana keep that stuff secret, but it would really help my lazy ass get this car fired up once I get around to actually working on the car itself and not schoolwork, hahaa. (I'm soldering in the extra vb921's this morning for waste-spark, under the GM coilpack, wheeee)

---BillyM

[cheappower82]

actually, i don't think we ran easytherm, we just used the default settings (according to linuxman51)

I'll be upgrading the megatune software and msns-extra firmware this weekend; if anyone wants my config files, let me know

[CanuckDave]

actually, i don't think we ran easytherm, we just used the default settings (according to linuxman51)

I'll be upgrading the megatune software and msns-extra firmware this weekend; if anyone wants my config files, let me know

If you could send me config files I'd really appreciate it. email addy is
dkendal@supraclub.ca

I'm finally getting around to getting my 6M built back up this weekend, and I'll be spending my evenings next week working on getting the harness built up, if the stock coolant sensor can be used then that certainly makes things easier.

[nikwal]

easytherm takes no time at all..
Remember .. you might neet to lower the resistor 2k5 ?? on ms if the resolution looks bad, then just enter the new resistor value in easytherm and make new files/burns/..