View Full Version : My fuses keep blowing out..
volcomfreak182
09-16-2006, 06:19 PM
I had a Fuel pump realted thread up recently. I just today installed the fuel pump with an On and Off switch... The proplem now is that it's blowing every fuse I put in in. Does anybody know why thats going on ???
Kevin Kisseberth
09-16-2006, 11:31 PM
Im suck at electrical but better check all your grounds before anything else
Junkie
09-16-2006, 11:36 PM
More like a dead short,than a ground problem IMHO.I'd be tracing every wire from the fuel pump forward,checking for wear/brakes in the casing and contact to ground,on power side.
Tire Shredder
09-16-2006, 11:56 PM
More like a dead short,than a ground problem IMHO.I'd be tracing every wire from the fuel pump forward,checking for wear/brakes in the casing and contact to ground,on power side.
while you're at it you can replace any brittle wires, reinforcing with tape, and zip tieing anything that looks like it could move and cause any future breaks. New and stock is good but if you improve on it in some areas, even better!
Powered by vBulletin® Version 4.1.9 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.