View Full Version : New EMS Standalone CHEAP
11-06-2006, 11:22 PM
here is the new EMS Standalone, very affordable. Here is the link to it on Supramania.
11-07-2006, 02:49 AM
We can make this pnp into any harness.
11-07-2006, 08:30 PM
how much would plug and play into a 7m mk2 cost?
11-07-2006, 08:37 PM
Still like megasquirt 2
11-07-2006, 08:42 PM
~$200 for labor. Will include custom ends that will plug into your 7m harness. So its basically like a PNP ecu at that point.
You still have to buy the EMS though.
11-07-2006, 08:51 PM
Damn not bad at all. Did you start stocking this EMS? Same pricing goes for 2jzge motors?
11-14-2006, 11:56 AM
it looks like a MicroTech MT-8.
11-14-2006, 12:33 PM
Crap $950 is very affordable!!!? AHAHAHAhaha..ha.......damnit I'm poor.
11-14-2006, 12:48 PM
I've got a MicroTech LTX-12, top of the line basically, for $900. total kit, from cable to harness to discs and adapters. does fuel and ignition. total control.
11-15-2006, 05:33 PM
I've got one. It looks nice. If you go turbo, you will need to use the stock 1jz/2jz ignitor as the ignitor available will support N/A only. Also, the current to the ignitor is supposedly cut in half??? So the spark isn't so great. MSD DIS-4 should do it.
Another thing, this EMS is supposed to use all factory sensors, including the crank position sensor for timing, which the Megasquirt II doesn't have code for, yet. For a stock 1JZ harness, plug and play for around $1200. It has an auto tune feature, where you plug in the target AFR, and it automatically ahem, tunes. But we'll see how well that works............ in real life.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.