Window was stuck...

[DRIFTINGmy85]

My drivers side window was stuck and not functional. It was about an inch too high and looked really lame. :duh:
Attempting to use the driver's side window switch would only result in a click from the window motor. Also, the driver's side switch wouldn't roll the passenger's window down, but the passenger's switch would roll the passenger's window down.
After thinking about it I tested the driver's side window switch to see how much voltage was being used when activating the switch. It was only 5v, for both windows. Not knowing what voltage was necessary to make the window work I went to pick-a-part and got a new window switch and installed it. Viola! The window switch works. It controls both windows now and it's sweet! :zzzzz:

The voltage it draws now is 10v.

Thought I would share my problem and solution with everyone!

[CELICA XX]

My drivers side window was stuck and not functional. It was about an inch too high and looked really lame.

How can your window be "too high" ?

[DRIFTINGmy85]

It was like that when I purchased the car. When taken apart, the brackets that were meant to stop the window at a certain height were not contacting the white round stopper on the glass itself. My window is all out of whack. It's very un-adjusted. :sadsmilie