PDA

View Full Version : LM 1 Up and running-kinda long



CarFreek
02-08-2007, 11:57 PM
First things first-THANK YOU WADE!!!!!! Im on the innovate bandwagon now, I bet you get tired of being right, Billy. Those of you who do not know the story, last year after my turbo was running, Wade T gave me a possibly non functioning LM1 meter. A couple months later, I purchased a Rabid Chimp Elbow to complement 3 " exhaust I bought from Billy. For my Birthday, my loving wife bought me an O2 sensor, exhaust Bung, Serial cable, power cable, and o2 cable from Innovate. Hook it all up, AND same ****** error code. Heres where it gets real good-I contact Felipe at Innovate-he gives me return #-They have it by last Friday. I call Tuesday-" oh, it will ship today or tomorrow"- Got it back today. NO BILL NO CHARGE NO FREIGHT The meter wasnt even purchased by me-Billy, Chimp, Wade, then me-I FULLY expected to pay for even a new piece-wouldnt surprise me in Automotive high po world-these guys are the POO- INNOVATE FTW :hail: My readings tonite were pretty good-14.7 at steady throttle and idle, dipping into mid 12s with 3/4 throttle with only one wide open pull- hit 11s briefly with that. Now its choices time-Do I hard mount LM1, and buy gauge? Do I keep portability and just use occasionally or for tuning? How soon can i get lma2 and EGT bought? :zzzzz: :zzzzz: :zzzzz:

Junkie
02-09-2007, 12:06 AM
Nice .... No hardmounting for a bit please :D

Dangerous Ken
02-09-2007, 12:09 AM
Buy a guage...

No hardmounting for a bit please x 2 :D :D

Ken

CarFreek
02-09-2007, 12:19 AM
Nice .... No hardmounting for a bit please :D

Im with you guys. I owe another tremendous Karmic Debt on this one. Im throwin it out there for ANY Pac NW supra peep with a Wideband O2 Bung in their car. And I have a feeling that "work" tomorrow might be one long recording session. :woot: :zzzzz: :mk2_vroom

sarinas_dragons
02-09-2007, 12:27 AM
Yea Mike and all!

Dangerous Ken
02-09-2007, 12:34 AM
Expecting Raptor Racing 6 to 1 headers With Wideband Bung to show up soon in Everett.

Ken

cheappower82
02-10-2007, 02:05 PM
Tuning with my LC-1 makes life so much easier. I've had mine in for about a year and a half; I've done about every WB no-no (leaving the power on without the engine running, not calibrating, etc). But the sensor is pretty much still dead-on accurate. This definitely beats spending all my $ on dyno time.

Go for the portability route on the LM-1; i'd like to see one of those Wb gauges too