Ordering Parts from Vancouver Toyota

[ra24man]

My fellow Supra enthusiasts,

First I'd like to take a moment and say thanks everyone that I have had contact with on parts inquiries and orders! I've had wonderful conversations with many of you all across the North American continent and beyond! Yous peeps are awesome! I'd also like to clear up ordering procedures for all future transactions. I've had some 'brain-farts' when people ask me to order stuff for them in PM's or here in a forum thread. My apologies to anyone that this has happened to. If I've missed anything, please feel free to contact me and I'll try to get it handled. I'm not entirely sure why this occurs except that I'm a busy guy, even so, the e-mails always tend to get handled. I suppose it's because the e-mails are sent to me in two different locations (both my work computer and the Blackberry strapped to my hip) So...in my constant pursuit of improvement I'd like to initiate a change. From this point forward, please submit any parts orders directly to my e-mail. My e-mail address is mark@vancouvertoyota.com. Hopefully this will allow me to continue to improve my level of service to you all! Thanks for everyone's attention to this detail!

[ra24man]

high mark byany chance 4 fender flares n spoiler let me no thankz
Do I get to pick the year?

[Johnny Quest]

thanks for all your good work and help, mark!!!!

[ra24man]

thanks for all your good work and help, mark!!!!

My pleasure Ratmany! I take it you got your antenna ornament?

[gus_28212]

Hi Mark,
I was told to ask you!

I need 2 left and 2 right front side marker lights
1 set for my 1980 Supra
and 1 set for my 1980 Celica convertible

I THINK they are the same,
any chance on me getting 2 sets?

thank for you help!
Larry (aka gus)
:faint:

[ra24man]

Gus (aka Larry)...please start your own thread in the future...yes I should still be able to get the front side markers for your A4 beasts...I'll have to check on them on Monday to get the pricing.

[FRANKIEG]

mark whats the cost on the rubber strut schocks mounts the ones with the 3 nuts

[83mkII]

hi mark can you get the rear springs for a 83, mine are in bad shape. i sent you an e-mail also

[ra24man]

E-mail replied..

For anyone else looking in...Toyota no longer sells rear springs for the MkIIs...but I believe Raptor Racing has standard height springs available.

[guido]

hi
i am on search for a set of front side corner euro type
here there are not available,do you think you can find a set?

regards

[ra24man]

hi
i am on search for a set of front side corner euro type
here there are not available,do you think you can find a set?

regards
Nope...not here in the States...they still sell them in Japan, NZ, and Austrailia from what I understand. Not cheap either. I still have the North American ones in stock.

['85 supra]

Mark I need a quote next week sometime on a rebuild kit for automatic trans on an 85.

[ra24man]

Mike,

No you don't... $791

[supraturbo85]

hey mark can i get a quote on water pump for an '83 and also left and right front strut mount bushings

[rexgo]

From this point forward, please submit any parts orders directly to my e-mail. My e-mail address is mark@vancouvertoyota.com. Hopefully this will allow me to continue to improve my level of service to you all! Thanks for everyone's attention to this detail!

Isn't it clear - just send him an e-mail - I don't need to see it.

[original menace]

can you obtain an engine rebuild/overhaul kit for the BEAMS 3SGE?

[ra24man]

can you obtain an engine rebuild/overhaul kit for the BEAMS 3SGE?
Is this a Camry forum? LOL

I've never lookied into BEAMS parts...have never had a request before. Probably better off dealing with the people out in cyberspace that deal in the stuff in my opinion.

[Little Wing]

Hey mark how much for a manual transmission rebuild kit for my 85?

[ra24man]

Blake,

Try these on for size bro...

http://www.drivetrain.com/parts_catalog/manual_transmission_overhaul_kits/toyota_w_series_overhaul_kit.html

http://cobratransmission.com/index.php?main_page=product_info&cPath=2_1838&products_id=50048005&zenid=a01f4bd0b88e8e298edbfb519d152c25

Than add...

http://cobratransmission.com/index.php?main_page=product_info&cPath=2_1838&products_id=50048015

Most of these kits come with the same Koyo bearings Toyota sells...at half the price. My parts are all individual pieces..and they get expensive fast!

How's school treating ya?

[Little Wing]

Awesome! Schools amazing man we finished engines and now were on transmissions haha. It's totally sweet. Tearing apart a tranny and building it is super easy.

[ra24man]

Awesome! Schools amazing man we finished engines and now were on transmissions haha. It's totally sweet. Tearing apart a tranny and building it is super easy.

...With the proper tools it sure is.

[Little Wing]

haha yeah. shops provide those tho and if i do any rebuilds anytime soon, we have almost all snapon tools.

[Little Wing]

Hey mark I'm dropping my diff soon, what materials do I need? Gaskets? Anything you recommend replacing? I'm just checking it out is all. Shipping to 85392?

[ra24man]

They are pretty easy Blake...just check to make sure the seals aren't leaking and reseal the rear cover before tossing it back in

[DANNY SUPRA]

HI,Mark I am from Malaysia and am looking for an LSD for a 1983 L type Toyota Celica Supra MK 11.I also need a set of front seat belts.Any suggestions?

Danny Supra

[ra24man]

LSDs are available from multiple sources here stateside (TruTrac is the most commonly used) and you can get TRD and Kaaz LSDs out of Japan. Seatbelts are discontinued, so used is the way to find them.

[AJ]

Mark, are the add-on rear shoulder belts still available??????


Seatbelts are discontinued, so used is the way to find them.

[ra24man]

Mark, are the add-on rear shoulder belts still available??????

No Arch...they are history

[calicoupe]

Hi Mark - do you happen to know if your able to get 1985 4runner side body "rubber" moldings? Picture below on the right. THANK YOU in earnest.

http://i775.photobucket.com/albums/yy36/dprstn/xtras1.jpg?t=1304024814

[suprasax]

Hi Mark:
I have an '85 Supra and need front moulding part #58742-14010. Got any in stock?
Thanks for all that you do to keep our Supras alive and running! Thanks! Dave

[ra24man]

Hi Mark:
I have an '85 Supra and need front moulding part #58742-14010. Got any in stock?
Thanks for all that you do to keep our Supras alive and running! Thanks! Dave
Nope...history!

[Solo1Supra]

Hey Mark, I got the exhaust manifold studs in the mail yesterday. You Da Man!
Top notch service as per usual. Many thanks.

[kanazai2001]

Hi, Mark,
I have difficulty to access http://www.vancouvertoyota.com/ to check on the part availability...

Please assist...

zai

[bigpete]

Hi mark, I'm looking for a windshield wiper motor for my 83 P. PM me with avaiability and price .