PDA

View Full Version : Trying to figure out what previous owner was trying to do...



DRIFTINGmy85
10-20-2007, 02:12 AM
I'm trying to figure out what the previous owner was trying to do.
Here are pics...

This is how I found it
http://i18.photobucket.com/albums/b111/Muziq_138/IMG_3818.jpg

With this thing...
http://i18.photobucket.com/albums/b111/Muziq_138/IMG_3825.jpg

Here:
http://i18.photobucket.com/albums/b111/Muziq_138/IMG_3826.jpg
http://i18.photobucket.com/albums/b111/Muziq_138/IMG_3821.jpg

Here's how the lines are now
http://i18.photobucket.com/albums/b111/Muziq_138/IMG_3822.jpg

I got one of these:
http://i18.photobucket.com/albums/b111/Muziq_138/IMG_3819.jpg

And put it here:
http://i18.photobucket.com/albums/b111/Muziq_138/IMG_3820.jpg

They took out that 2nd vacuum thing and spliced in that other unit.

I'm guessing they were trying to modify the egr system somehow, I just don't know how.

When I was at pick a part I recorded a mental snap shot of how the lines are supposed to be from the Supra I got the vacuum unit from and mine aren't matching up. Both units get a line from another line with a double t-split-off-connector, then one of the return lines goes into the firewall and I forget where the other one goes to.


Does anyone know what that foreign unit is or what was trying to be accomplished here?

jsn_ayers
10-20-2007, 03:02 AM
they must of had i idle prob. and made there own switched vac system pull it all and start with a diagram.

RedP85
10-20-2007, 11:59 AM
http://i4.photobucket.com/albums/y108/Redp85/Reference/vaccumlines.jpg

DRIFTINGmy85
10-20-2007, 12:32 PM
Thanks