what do you guys think about these Crower cams, springs and valves?

[Avp23]

is this the same company "Crower rods" every one talks about? if so im sure you could make the best head ever, Cams, valves and springs?

Valves $397.00
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=007&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=170195435995&rd=1


Cams $565.00
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=180159623166&rd=1

Springs $324.00
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=006&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=160210476942&rd=1

Whats the feed back guys????

[SilverMk2]

I run the 272s in mine. If I could do it again I'd probably go with 264 for a little less aggresive cam. That said I think on a stock ECU you'd be missing out on the half the fun. I spin mine up to around 7500.

[Avp23]

:ugh: are you joking? wow. sweet LOL so do you have any thing else done to the head as well.

[ra24man]

Crower is well known with the 2JZ crowd...never heard anything bad about their pieces.

[SupraGuy31]

Ive talked to a few People that bought them. Only thing I can tell you to watch out for is make sure you have them checked before you install them. Ive been told that even though they are new, there have been a few batches that were out of tolerance, Lobe Height, and overall bad Quality. Im not saying that they arent a good product, just make sure you check them out really well before you install them. And Yes, Go with the 264 cams, 272 are nice but Idle isnt that great and If Im correct, you have to modify the valves for them to work right.

[Avp23]

good stuff guys, thanks