New Supra Owner - Need Some Parts

[TheAmazingBlaze]

Hi,
I just bought an 86' Supra P type Red 5 speed. It has gray leather, the car is in good shape. I need a part:

- Gray Leather Drive Seat

Does anyone have a nice one, if so send me a picture.

Also does any one know if you can install the trip computer into a P type?

Thanks:eek4dance::thumbsup:

[turbogoo1]

Trip computer on a analog / digital dash can be done, but medium skill level is required. I believe there might be s afew wires that need soldered, or mild cutting to get it to fit inside the housing.

Where in pa are you located?

[supkar]

Most driver's seats are pretty worn. You can usually take the seat covers off the pass. side and adapt it for the drivers. I did with my blue cloth seats. Perhaps it's only the left bolster that is worn, which is typical. I could provide you with some gray leather seat parts. I have a bolster in fair condition and a lower rear cover in good shape.
Also, it's best to seek parts in the "wanted" section. In any case, welcome to the site.

[RedP85]

Trip computer are plug and play in a digi dash Ptype, as long as you have the 3 parts.
For an anslogue dash, you still need the 3 components, but also need to do some hands-on work.
PM me your email, I'll send you the info that was originally put up by Mike Webber.

[silverton]

my buddies P-type has the control panel for the trip computer, not sure about what it's missing. The professor would probably know what's up with it.

[RedP85]

You need 3 things:
-The keypad, just right of the steering column,
-The display, which takes the exact same place as the cluster clock,
-The Cruise Computer, that installs behind the cluster.

Image courtesy of CJSREDPRA:
http://img.photobucket.com/albums/v285/looperboy81/2007_0503Image0537.jpg