crankshaft pulley bolt torque spec

[whitey408]

does any 1 have the torque spec for the crankshaft pulley bolt and for the pressure plate for a 6m?

[RedP85]

http://www.cygnusx1.net/Supra/Library/TSRM/MK2/manual.aspx?S=A&P=6
http://www.cygnusx1.net/Supra/Library/TSRM/MK2/manual.aspx?S=A&P=12

5 or 6 M should not be the same, as the 6M has the early 7M crank....

[Tanya]

IIRC the tq spec is a tad higher for the 7Ms, at least for the crank bolt, and I would go with the 7M spec on a 6M crank bolt. I don't recall what it is though, I just torqued my bolt by hand, as hard as I could with the tranny in reverse and e brake up, and the car still moved :x

[MTSMKII]

TSRM say's

http://www.cygnusx1.net/Supra/Library/TSRM/MK2/manual.aspx?S=EM&P=7

[Sean Chung]

I agree with Tanya. The 7m bolt is larger thread than the 5m bolt. I would def go with 7m torque spec.

[RedP85]

7M says 195, just reverse the last 2 digits from the 5M (159)!