PDA

View Full Version : speedo problem...



whitey408
02-17-2010, 11:29 AM
alright yall, i know the whole subject of why the speedometer needle bounces has been covered numerous times, so you don't have to tell me that it may be a bad cable or bad gear in the tranny.

my problem is i have now gone through my 3rd speedo cable (looking for a 4th). i am kinda confused on this matter. everytime i install a new cable my speedometer will work great for a while. but it seems that after a few months when i am screwing around in the car if i hit anything between 105mph and 110mph my speedometer starts bouncing once again and leads to total failure. this is starting to get quite aggrivating.:32:

i am using a '85 guage cluster, w58, and a 4.30 diff.. Can anyone tell me if something could be geared wrong? or why i am going thru so many cables?

83CelWA
02-17-2010, 12:24 PM
Are you buying new cables? Or intalling ones from other cars that you find?

gteduck
02-17-2010, 12:29 PM
is the speedo itself stuffed? Maybe rip the dash out and hook up an old cable to test it with a power drill or die grinder if drill's not enough rpm ! IF it plays up it's not the gearbox end that's the trouble.:good: i assume you've checked the gearbox section or you could do same thing with that, spin it up ,it might be seizing at high rpm's or sticky.:twodrunkg

whitey408
02-17-2010, 12:37 PM
83 no they haven't been brand new. and i guess i will have to try what you are saying gte. it has been on the same tranny but in 3 different cars. so i suppose it would have to be the tranny gears hunh?

gteduck
02-17-2010, 12:59 PM
83 no they haven't been brand new. and i guess i will have to try what you are saying gte. it has been on the same tranny but in 3 different cars. so i suppose it would have to be the tranny gears hunh?

i didn't realize the gear box was used in three set up's and dash was changed.:duh: rip the little sucker off and look in side if it comes apart .if not spin it up as i mentioned .Or get one off a spare or blown box. just chage the wormwheel if there's a difference.

i ripped all the little bit's off my blown box like that ,the shift dampers and reverse light bit before i threw it out. lucky i did cause a damper stick's and i've nearly gone into 1st instead of 3rd a few times:suicide::eek: