View Full Version : 85 celica 22re
05-20-2010, 01:22 AM
hey i just got a 85 celica 22re for a beater drifter, i am just running this motor till it blows. but we ran into a snair with pulling the driver side axel to get my diff out to weld it, i tried the chain technique till i bent a stud,and i reafed on it and it still wont come out. passenger one came out easy though.. and if anyonehas cool fab ideas for this drift beater i would like to hear them
05-20-2010, 09:38 AM
GT, or GT-S ie. SRA or IRS?
05-20-2010, 09:48 AM
not a clue it is the 2.3 ltr sindle cam the slow one, hatch back
05-20-2010, 03:25 PM
Not familiar with the '85 Celica having a 2.3l engine in it since the 22re is a 2.4l.
And if you do not know the difference between a Solid Rear Axle (SRA), and an Independant Rear Suspension (IRS), I think you need to learn more about working on cars before you start tearing into it.
If it is an SRA, a slide hammer with the attachment to go onto where the wheel bolts up is the easiest to use (quite a few auto parts stores rent them out). If it is an IRS, just tap on the backside of the axle stub with a hammer.
05-20-2010, 09:06 PM
it is defenetly solid axle and prob is a 2.4 then and i used my slide hammer with a a fabbed up stud mount, and then when thaqt failed i used a chain come along, then that didnt work resorted to chain, still didnt come out at all,
05-20-2010, 09:11 PM
Hmm, usually they do not fight that much when you try to take them out. Does the axle spin freely?
05-20-2010, 09:16 PM
yeah everthing works fine it spins normally its just really on there day 2 of getting it out is today so i will just keep on reefing it
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.