View Full Version : Recommended spark plug for 5m-gte / 6m-gte?
05-24-2003, 12:07 PM
What spark plug do you run in your set-up? From what I understood, I should go with a step-colder copper plug at .032" gap. Is this true?
6m-gte w/ H3 trim CT26
05-24-2003, 12:36 PM
That, or NGK Iridium if you don't wanna change it that often.
05-24-2003, 05:20 PM
I have Denso Iridiums; I guess I could drop the gap. But is there an advantage to using copper plugs (since they're cheap and easy to swap on our cars)?
05-25-2003, 12:33 AM
NGK V-Power's....BPR6EY-11....That's one step colder than stock, which is a BPR5EY-11. Both actually worked great on my 6MGTE setup.
06-02-2003, 03:48 PM
Any disadvantages to running a 1 step colder plug on a turbo'd 5m or 6m?
06-02-2003, 04:42 PM
not reely, the colder plug will keep detonation at bay pretty well. So if your running high boost...or a borderline fuel system, I would use the colder plug.
06-03-2003, 03:54 AM
hey racetek can you send me an email or give me a place to email you at... I have a few questions
06-03-2003, 04:37 AM
check my website for the email..or click the email button below my posts.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.