Small Defrost Vents for moulding - Page 2

Page 2 of 7 FirstFirst 1234 ... LastLast
Results 11 to 20 of 70
  1. #11
    CelicaSupra.com Member REN69's Avatar
    Join Date
    Sep 2010
    Location
    Toronto/Clarington
    Posts
    1,117
    Here I am looking for a Hot Wheels Supra, and you have the molds... that's awesome, lol

  2. Remove Advertisements
    CelicaSupra.com
    Advertisements

  3. #12
    CelicaSupra.com Member ddd228's Avatar
    Join Date
    May 2005
    Location
    N. Seattle.
    Posts
    4,418
    Are you jazzed about reproducing some dash vents?
    Only 80% of the MK II guys need a pair. ANY color.
    Just the top section.
    http://www.celicasupra.com/forums/sh...ght=dash+vents
    Dave in Seattle. I keep LATE hours.Hidden Content
    '84 type "L" ,Auto ,daily driver. Dk blue.

  4. #13
    Member rycrok8's Avatar
    Join Date
    Aug 2013
    Location
    Chicago
    Posts
    84
    I would be interested in using them to draw up and 3d print. Mine are badly cracked and I want to make them as close to original as possible. This was on my list of other parts to 3d print for my supra.
    I would of course return them in the same condition you send them and provide you a free 3d set for helping me. They would be out of a black ASA which is like ABS in strength and has weathering and UV stabilizers in it. The 3d still shows print lines so they won't be as smooth. You could sand them down and paint to whatever color you want to make them smooth.
    There are other colors available, but none that are a match to the MA61 colors and I only am buying black unless a lot of people want a certain color.

  5. Remove Advertisements
    CelicaSupra.com
    Advertisements

  6. #14
    CelicaSupra.com Member ddd228's Avatar
    Join Date
    May 2005
    Location
    N. Seattle.
    Posts
    4,418
    Dr Jim sent me a link to some S.E.M. paint that matches the *blue* plastic parts and I'm ready to buy the paint if you can 3D print up some for ALL of us.
    I think that I can buff out the little lines in the parts with a buffing wheel and some grit of sorts.
    ANY color will be fine!
    I may paint mine silver just to show them off!
    Mine are toast,too.
    I think that Dave Harrison is "IN" for 2 sets. That makes 6,so far.Well,3 sets.
    I do Pay Pal when you are ready.
    I need mine B-4 December.
    Dave in Seattle. I keep LATE hours.Hidden Content
    '84 type "L" ,Auto ,daily driver. Dk blue.

  7. #15
    Member
    Join Date
    Sep 2013
    Location
    Florida
    Posts
    34
    I would like to buy a set if in black so to whom would I Pay Pal too. Senior

  8. #16
    CelicaSupra.com Member mallow's Avatar
    Join Date
    Oct 2005
    Location
    Whittier, CA
    Posts
    264
    I'm in too! One set.
    -Chris
    '82 L-Type : Slowly but surely.

  9. #17
    Junior Member
    Join Date
    Aug 2016
    Location
    cottonwood
    Posts
    24
    How much would these be? I might be in for a black set.

  10. #18
    CelicaSupra.com Member ddd228's Avatar
    Join Date
    May 2005
    Location
    N. Seattle.
    Posts
    4,418
    I'd go $40 for a pair but that depends on how many you can make. I would suggest about 30 pairs to start. That will make it a worthwhile adventure for you. 40X30=$1,200 U.S.D.
    WHATDOYOUTHINK?
    Photos,when available,please.
    Dave in Seattle. I keep LATE hours.Hidden Content
    '84 type "L" ,Auto ,daily driver. Dk blue.

  11. #19
    Junior Member
    Join Date
    Aug 2016
    Location
    cottonwood
    Posts
    24
    For 40 I would be in for a black set. Definitely in for a set in terracotta if you could get the color close to the color of the other vents. But I know that's a strech.

  12. #20
    CelicaSupra.com Member toysupguy's Avatar
    Join Date
    Sep 2003
    Location
    Dallas, TX
    Posts
    204
    I would definitely want a pair of these. Sign me up! Also, an idea for the next project: the plastic cover behind the door latch inside, (held on with one screw).
    85, white/burgundy, 5MGTE
    89, gray/gray, 7MGTE

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts