Help in finding & choosing a driveshaft center support bearing!

Results 1 to 3 of 3
  1. #1
    CelicaSupra.com Member auto_cran's Avatar
    Join Date
    Dec 2006
    Location
    Plano, Texas
    Posts
    101

    Help in finding & choosing a driveshaft center support bearing!

    Shop says the center support bearing for the driveshaft on my '86 P-Type is shot, so I'm looking for a new one. First thought is to check Rockauto.

    Under 86 Supra 2.8 - there's nothing - same under 85 Celica-Supra
    But if I look under 86 Celica 2.8 I see some: DEA/MARMON RIDE CONTROL A6001, NATIONAL HB7 .

    And the same if look under 85 Celica 2.8 - I see the 2 above as well as: PIONEER 648588, BECK/ARNLEY 1013784, TIMKEN HB7

    So couple questions:
    1) Are these the right ones for car?
    and
    2) If they are, any recommendations on which one to get? Prices range from $22 for the DEA/MARMON RIDE CONTROL A6001 all the way up to $79 for the NATIONAL HB7.

    Some info on my car: 86 P-Type, 5-speed, 127,600 miles. All stock.

    Any suggestions or advice is welcome!!

    Chris
    (auto_cran)

  2. Remove Advertisements
    CelicaSupra.com
    Advertisements

  3. #2
    CelicaSupra.com Member
    Join Date
    Nov 2016
    Location
    USA
    Posts
    156
    No advice on which part to get, but I did read that some folks have found certain parts places have deleted the subgroup Supra from their tagging, but the parts remain available under Celica.

    Call the place.

  4. #3
    CelicaSupra.com Member ddd228's Avatar
    Join Date
    May 2005
    Location
    N. Seattle.
    Posts
    4,431
    Under the HB-7 Timken,I got this:
    http://www.autopartswarehouse.com/sk.../DEAA6004.html
    CAUTION! This can be installed backwards!!!!!!!
    Read all of this first:
    http://www.cygnusx1.net/Supra/Librar....aspx?S=PR&P=2
    You will be fine.
    Dave in Seattle. I keep LATE hours.Hidden Content
    '84 type "L" ,Auto ,daily driver. Dk blue.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts