Results 1 to 3 of 3
Thread: NGK part # change
-
04-25-2009, 04:09 PM #1
crashtest dummy
- Join Date
- May 2004
- Location
- SE Pa
- Posts
- 1,564
NGK part # change
For anyone out there that uses the NGK copper plugs #3330, BCPR7ES (one step colder) in their 7M-GTE - I just found out that they discontinued the stock #.
I just picked up some of these w/ in the last couple months and went to get another set the other day in which everyone told me they are now discontinued!
After further investigation, I found that the plug itself is not discontinued, they just changed the stock #; its now 6282
Also - if you have any trouble getting them, the Denso equivalent is # 3010 - Q22PR-U
Both should be at most parts stores (application is many Saab 900/ 9000 turbos and a few 3.6L 911 turbos), or atleast able to be in w/ in a day or so, and cost around $2 each.damon
'76-'77 Celica GT's (x3)
'81 MKI Supra's (x3.5)
'82-'86 MKII's (lost count)
'88 Celica all-trac
'88 2WD Truck
'87t -'90t MKIII's
-
04-25-2009, 04:12 PM #2
CelicaSupra.com Member
- Join Date
- May 2004
- Location
- Windsor, Ontario
- Posts
- 6,293
You are a classy fellow! Thanks!
86 Black MA67: 87 7M, 300hp, no shit! 84 Brown MX63: It's a Dork, not Donk!
Check out some 7M Supra Videos!
Links: My 7M-GTE swap guide Electrical FAQ 85 MA61 TEWD 86 MA61 TSRM 87 MA71 TSRM 90 MA71 TSRM
Originally Posted by Tire Shredder
-
04-26-2009, 02:21 PM #3
CelicaSupra.com Member
- Join Date
- Mar 2003
- Location
- Auburn, WA.
- Posts
- 5,757
Thanx-Explains why I havent been able to get any local for awhile.
86 SDR-"Shuttlecraft" 16" Drag dr-27 wheels, Coilover/AGX/Celica Arms front, Camber Mod/Cut Springs rear, Poly Bushings all around, Whiteline sway bars, 12" Homemade bbk front and rear, Weir Diff bushing, Pacesetter with custom RABID CHIMP mandrel bent 2.5 with Flowmaster resonator, short shifter, 5m-GZE using upgraded sc-14 Toyota supercharger, with Custom RABID CHIMP piping..
Reply With Quote
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
