Results 1 to 4 of 4
Thread: Face transplant
09-23-2009, 05:57 AM #1
Has any one ever put the front and rear bumpers from a supra on a celica?? The back should fit fine and the front one my need some persuasion. I am wondering how it would look I may try it.
Any thoughts on the matter??
Even the ones where you call me a dumb ass =p
09-23-2009, 06:08 AM #2
im sure you could do it id like to see it done it may look good but the celica is shorter then the supra so it might throw off the lookTravis
83 red 5-speed p-type (super clean inside and out)ONLY ONE LEFT :-( mods:header,muffler,arp head studs,ported intake&exhaust
82 black hardtop 5-speed p-type (R.I.P)
82 grey auto L-type (fixer uper)(SOLD $600)
82 tan auto L-type (sold to c.s member)
BILLY M FOR PRESIDENT
09-23-2009, 11:45 AM #3
the rear will probably work on the hatchback model Celica, but the front is a NO NO.
Definitely will not work w/o major fabrication.1985 P-type 5 speed
09-23-2009, 12:48 PM #4
There is quite a bit of work to be done to get the rear bumper on a celica since the celica bumper bolts to the inner metal bumper and the supra bolts directly to the body.
For the front, you will be missing just about all the mounting holes that are needed to mount the front assy.
What is the reason for doing this? Have a front and rear damaged celica and a t-boned supra? Or are you doing some "ultimate rice" and pretty much making a poser supra?-Chris
1983 Celipra GTS:
6M bored .50 over. 250cc injectors. Delta 272 regrind cams. Carter HF fuel pump.
Pacesetter header w/2.5" cutsom exhaust. Open air intake filter. 3" piping to TB. 65mm TB & ported AFM.
4:10 rear from Supra. BillyM shifter kit. Swapped most interior over to black. T3 camber plates.
935 Budget Coilover kit. KYB AGX struts. T3 Needle bearing upper perch kit. Eibach Sport rear supra springs. SF Ford TFI Performance coil.
Almost finished with the fiberglass hatch!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)