Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Join Date
    Jul 2008
    Location
    quebec
    Posts
    271

    5m-ge hks single and twin turbo set ups!!

    alright so a few of yous here on cs may or may not know that i was lucky enough to come across an incomplete turbo kit.....

    what i want to figure out is what exactly came in these kits...

    i have a single turbo kit and want to figure out what hks provided when turboing the 5m..

    heres a list of the things i know were in the set up.....
    -ht18-38b turbo and elbow
    -3 inch downpipe
    -hks intake manifold
    -hks intake pipe
    -blow off valve
    -hks fuel computer
    -intercooler and pipes
    -hks egc
    -hks aic
    -hks t3 single manifold or the hks twin turbo manifolds

    feel free to post up pictures of what you have or know was in the hks turbo kits....

    ill be posting up pictures of what i have a little later on today......

  2. #2
    Join Date
    Oct 2003
    Location
    Montréal, QC
    Posts
    6,003
    check tes emails !
    -Jocelyn,
    P85-6MGE SDR(HKS kit c/w IC and F-Con in a box) 225KKm, NAL seats, 2.5 Brullen, ACT clutch, LJM, SS lines, Trip Computer. EuroH4
    P85-5MGE SDR had 439KKm (for 17 years my daily runner, RIP...)
    2002 E39 ///M5 LMB, 1985 CelicaSupra EWD in pdf

  3. #3
    Join Date
    Jul 2008
    Location
    quebec
    Posts
    271
    hey thanks jocelyn...i already came across some of the info you sent me but it sure does help to have it all in one place it weird how there isnt much info regarding the hks turbo kits...especially the single turbo set ups....

    here are some pictures of what ive managed to gather....

    this is the actual turbo used in the hks turbo set ups...




    hks t3 manifold


    close up of manifold mounting flange


    hks ic piping (incomplete)


    hks ht18b elbow


    hks intake pipe (needs to be powder coated)


    reducer and 90 elbow for cold side


    ht18b exhaust housing on hks manifold


    will have pictures up of the hks fuel computer ....should be up sometime this week...

    could anyone take a picture of their hks intake manifold off the single turbo kit if anyone has ....and a pictures of the intercooler and piping would be good...

    feel free to post pictures of what hks parts you may have...always good to see what rare parts are owned by us cs members....

  4. #4
    Join Date
    Jul 2007
    Location
    San Diego, ca
    Posts
    1,699
    Beautiful. I need to find one of those HKS "intake pipe". Can't wait to see it when complete.

    www.socalautohub.com
    "Bringing Automotive Enthusiasts Together Across Southern California"

  5. #5
    Join Date
    Jul 2009
    Location
    Everett WA
    Posts
    906
    HKS T4 manifold with a T3 flange welded/adapted, and a block off plate for the external wastegate. Same manifold that is on Toomie, that is T4 flanged, that came from Reg R.
    Shawn > Junkie < 83 Ltype 7mgte/a340 swap, 84 Ptype 7mgte and 20k original miles on the chassis, 85 Ptype Blue Hard top, basicaly stock. 82 Ltype, auto ... not home yet, but another added to the stable.

  6. #6
    Join Date
    Jul 2008
    Location
    quebec
    Posts
    271
    yep t4 mounting flange but uses a t3 turbo inlet .......hey SMP7mGTE what do you mean same manifold that came from Reg R? and whats toomie? lol

    do you happen to have any additional information that could be of use?

  7. #7
    Join Date
    Feb 2006
    Location
    indianapolis
    Posts
    408
    Reg r= one of the first to do 7m swap legend. Toomie=search area 51 graduate. I've been lurking since 03 LOL

  8. #8
    Join Date
    Oct 2003
    Location
    Montréal, QC
    Posts
    6,003
    Jo, you still some to read...
    http://suprasonic.org/gtestory/
    Reg Reimer !
    -Jocelyn,
    P85-6MGE SDR(HKS kit c/w IC and F-Con in a box) 225KKm, NAL seats, 2.5 Brullen, ACT clutch, LJM, SS lines, Trip Computer. EuroH4
    P85-5MGE SDR had 439KKm (for 17 years my daily runner, RIP...)
    2002 E39 ///M5 LMB, 1985 CelicaSupra EWD in pdf

  9. #9
    Join Date
    Jul 2008
    Location
    quebec
    Posts
    271
    alright thanks supraturbo85 and thanks jocelyn for clarifying that...

    i was sure happy to get this delivered to my door today






    number on back

    number on top


    i know this fuel computer if off a single turbo set up but am uncurtain on whether its for a stage 1 2 or 3....

  10. #10
    Join Date
    Jul 2009
    Location
    New Zealand
    Posts
    23
    Another one of those older style F-CON,

    These must be the model before the D series black ones,

    Possibly before 88 or so but i dont have any data to back that up,

    It does look to be in mint condition. i would say stage 2 kit cause you have pipes that suggest its intercooled and they look to be genuine not homemade,

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
id=a6141150">