Results 1 to 10 of 24
07-22-2011, 06:16 PM #1
[Open] Raptor Racing – RR/JDK Big Brake Parts Group Buy Phase II
Production on the BBK components is quickly winding down and we need to get Phase 2 going. We’re looking at production finishing early August and shipping to you happening roughly the end of August.
This group buy is for the add on components to the group buy. If you don’t have the adapters yet they are still available to you buy pricing is group buy pricing + 10%...the thread is here.
I’ve tried to keep pricing as low as possible but low profit margins on the group buy due to lower than expected sales on the bbk components and supplier increase the pricing is not as good as the last group buy.
Please don’t think of this group buy as one initiated to save you money, it’s a group buy that was initiated to get those interested a product. If you are comparing the pricing here to what’s in my catalog please don’t as the catalog is outdated and needs updating.
That being said here is the pricing:
Rotors and Options
Coleman Racing Front Rotors: $270/pair shipped + options
Coleman Racing Rear Rotors: $180/pair shipped + options
Rotor Slotting: $36/pair
Rotor Drilling: $116/pair
Rotor Heat Treating: $34/rotor
Rotor Shipping: $27/pair or $ 38/set
Pix above is for a slotted/drilled/heat treated and plated rotor.
Calipers; Pads and Lines and Accessories
Wilwood Dynapro Front Calipers: $300/pair
Wilwood Dynapro Rear Calipers: $300/pair
**Please email me if you need other calipers to match what you already have**
Wilwood Q Street Pads: $50/box (1 box does 2 calipers)
Hawk HPS Street Pads: $50/box (1 box does 2 calipers)
Wilwood 2lb Residual Pressure Valves w/fitting: $19.55/valve
Wilwood Knob Style Proportioning Valve: $39.95
Raptor Racing 6 (Front/Rear) Piece BBK Brake Lines: $140
Raptor Racing Front BBK Brake Lines: $75
Raptor Racing Rear BBK Brake Lines: $75
Color Options for Brake Lines: Clear, Smoked, Red and Blue
Wilwood EXP600 Dot 4 Brake Fluid. Wet Boiling 417; Dry Boiling 626F: $17.95/bottle
PLEASE NOTE: There is no additional shipping fee for calipers/pads/lines etc if you have ordered the BBK components. If you already have the BBK components and just need caliper/pads/lines etc please send me an email.
Zinc Plated Front Hardware: $35
Zinc Plated Rear Hardware: $15
The Hardware included in the BBK is Black Oxide Allow Steel, in the past customers had expressed an option for plated hardware would be beneficial so this is why I'm offering it. This is a GREAT option especially for the exposed hardware (rotor adapter)...it will really enhance the appearance of this awesome kit.
Rotor plating for Canadian Customers: please email for details
Any and all pricing above just applies to US Customers. Canadian customers have to pay additional shipping for rotors but do not have to pay additional shipping for the calipers/pads/lines etc.
All your items will be shipped from Toronto so there will be no surprise fees. In order to determine your shipping prices please email me what you intend to order (pm’s will be ignored). Please also note that all pricing is plus Taxes so please email me to get you a total as it varies by province.
International customers please email for shipping quotes.
Paypal Address: firstname.lastname@example.org
Please use the subject: 2011 BBK Group Buy Payment
USPS International Money Order: Contact info is in my Sig
Cash/Email Money Transfer: Canadian Customers email@example.com
Your Payment MUST include in detail EVERYTHING you are ordering and any options…if not your payment will be refunded. Please try to pay from a pc and not a mobile app as the mobile apps sometimes do not include your address, I also need your phone number as these will be shipping via UPS.
Contact info: firstname.lastname@example.org
Please send all inquiries via email with the title: 2011 BBK Group Buy Question
Do NOT PM any questions, I have well over 1000 PM’s in my box and I can not keep track of things efficiently via PM. If you PM me and I ignore you don’t be surprised.
This needs to be a well choreographed operation, these need to ship to a US Shipping address and I need to be here to access the order. The calipers also take a few weeks to get so I can’t let this group buy go on for long.
If funds are an issue and don’t have all the money for anything in this group buy right now please email and we will work something out so at least I have something to ensure you are serious and then you can pay me the rest prior to shipping.
Please try not to take advantage of this offer, I really need the funds asap in order to get this done…this is ONLY if you really don’t’ have the funds for the deadline.
That being said I am accepting payments as soon as today as either need your payment or need you to contact me with what you need by July 31st. I know that not having a long timeframe puts a damper on some of you and this is why I’m offering what I’m offering above. We can work out a non-refundable deposit for what you need…this ensures that you are 100% serious about these parts and I don’t get stiffed with a bunch of parts I don’t need.
I have written this on vacation with people nagging me to stop working, so please excuse any errors or omissions. I have done my best to written it so it’s easy to understand but PLEASE email me if you need any clarification.
07-22-2011, 07:06 PM #2
07-22-2011, 08:36 PM #3
Alex to answer your question the other calipers available are:
Forged dynalites show here:
Billet Dynalites show here
If I may add: those are want/need ANYTHING but the Dynapro's listed in the first post need to let me know and even pay ASAP. I've already talked to Wilwood and they are ready for me to order the Dynapro's as that is the biggest seller 10 to 1 so if you're in this boat you'll need to let me know asap.
07-22-2011, 08:57 PM #4
07-23-2011, 09:31 AM #5
Email coming up in the next few days.
07-23-2011, 10:08 AM #6
G, i will send you an email shortly, this short timeframe got me unprepared for this GB but we can work smthg out, just doing my math right now, another question to clarify, are those residual valve NEED to be installed on each brake line? the proportional valve is a MUST?? and the BBK brake lines are the same as the ones u sell for the stock brakes???Edgar M.
85 Two tones P-type 5 speed R.I.P
84 White P-type 2JZ-GE 5 speed
07-23-2011, 09:24 PM #7
The Front Lines are a different length and different angle on the fitting...the rears are just a different angle on the fitting. Personally I'd get a set as you'll be able to sell your other lines easier if you have a set.
07-24-2011, 12:46 AM #8Junior Member
- Join Date
- Dec 2010
- Los Lunas, NM
Is the heat treating on the rotors the same as cryogenic treating? Gonna e-mail you soon.
07-24-2011, 02:32 PM #9CelicaSupra.com Member
- Join Date
- Jan 2005
The hardware (bolts) holding the rotors to the adapters on my entire kit are rusted and ugly. Do I hear correctly that you are offering zinc coated hardware I can replace these with?
Unfortunately, rotors and pads are not a priority right now
-John77 Celica: GT coupe (SOLD)
82 Supra: L Type Terra Cotta Hardtop 7MGTE
82 Supra: L Type Terra Cotta (PARTS)
83 Tercel: 4WD (SOLD)
91 Mercedes 300SEL: Eternal Project
95 BMW 318TI: Daily Driver
07-24-2011, 06:59 PM #10
Bolts - George has a source for getting the rotor mounting bolts plated. :-)
Residual Pressure Valves - Not absolutely required, though I'd suggest it.
It's quite possible I'll be making some replacement lines so it's a PnP.
Proportioning Valve - if you plan on any type of track racing (autocross, etc), it's advisable.Jim
MK2 Geek Squad Member
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)