Results 1 to 10 of 24
-
06-09-2012, 11:31 AM #1
Junior Member
- Join Date
- Jul 2010
- Location
- Richmond, VA
- Posts
- 18
FS: Full 7M-GTE setup - $1200 OBO! - Pickup Locally - NOT PARTING OUT!
NAME (First and Last) : Robert Manley
EMAIL: ramanley69@verizon.net
PHONE: *Optional to post public but you must provide it to your buyer and/or an admin or moderator upon request.
LOCATION: Richmond, VA
PAYMENT PREFERENCE: CASH ONLY
------------------------------------------------------------------
PRICE: $1200 OBO
ITEM: Full 7M-GTE engine with auto tranny, ECU, wiring harness, factory intercooler piping, custom turbo piping, custom downpipe, new water pump, new belts (timing belt has recently been done and doesn't need to be swapped out just yet), relatively new alternator, AND factory CT-26 turbo! The works!!!
DESCRIPTION: I am selling my entire 7M engine setup complete with everything needed to drop it in. The engine is unmolested, which means it still has the factory headgasket on it, but since it has neven been past factory settings it really hasn't needed it (I suspect that it HAS been torqued down to factory specs by the previous owner though, but I cannot reliably prove that...).
When I bought the car in '09 it had 128K miles on her, and since I'm not sitting next to the odometer right now so I will have to post up the current mileage when I get it this weekend. Some of the seals have already been done (read my build thread to see what has been done to it...), but it is leaking oil out of the front and rear main seals, so those will have to be replaced. It will come with a factory turbo, but it smokes and has some shaft play and will need a rebuild.
I DO have a 57trim turbo from Driftmotion that has about 2k or less miles on it, but I am selling that separate for $500. The Mishimoto radiator is staying with my car BUT the factory fans will go with the motor. Anything else that is getting removed or is no longer needed for the 2JZ will also go with the motor, like the igniter and stuff. Any questions feel free to email me! (Exact odometer reading will be posted this weekend...)
http://www.supramania.com/forums/sho...uildup-Project
PICS:

-
06-11-2012, 10:05 AM #2
Junior Member
- Join Date
- Jul 2010
- Location
- Richmond, VA
- Posts
- 18
Pics of turbo...



-
06-14-2012, 09:39 PM #3
Junior Member
- Join Date
- Jul 2010
- Location
- Richmond, VA
- Posts
- 18
Price drop to $1000.
-
06-14-2012, 10:04 PM #4
-
06-14-2012, 11:26 PM #5
Junior Member
- Join Date
- Jul 2010
- Location
- Richmond, VA
- Posts
- 18
Drop into an MK3, but I don't know how much modding you would need for an MK2. You guys would know that better than me.
Sorry for the confusion.
-
06-15-2012, 06:31 AM #6
If this is still around next weekend I may get this...maybe...
84 supra 7mgte 57trim, mostly stock...for now...
Sexy-ass strut bars, soon to come "one-off billet grill"
04 Tacoma on 32" bfg
'95 gmc suburban (family bus)
-
06-15-2012, 06:32 AM #7
You have any pics of the intake side of the motor? Not the top, but the side of it.
84 supra 7mgte 57trim, mostly stock...for now...
Sexy-ass strut bars, soon to come "one-off billet grill"
04 Tacoma on 32" bfg
'95 gmc suburban (family bus)
-
06-15-2012, 09:10 AM #8
Junior Member
- Join Date
- Jul 2010
- Location
- Richmond, VA
- Posts
- 18
Not yet, but I'll have some pics of it hopefully today.
-
06-25-2012, 08:37 PM #9
Junior Member
- Join Date
- Jul 2010
- Location
- Richmond, VA
- Posts
- 18
$900 firm.
-
06-25-2012, 10:39 PM #10
This would be awfully tempting if it was ready for a mk2 (wiring harness). Good price GLWS, wish you were closer.
1982 Terra Cotta P-Type
Need boost...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)


Reply With Quote








