take hub off how thanks

[Kevin Kisseberth]

title says it I need to get the hub off and I have no idea how. I took the brakes off the brake mount off then went uder the car and took the big nut off that looks to hold the hub in and nothing after hammering it

[Supra Ev]

If you went under the car, you did it wrong.

Take the cap in the center of the brake disc off (should like 1.5-2" maybe. Metal, dome shaped) wedge a flat head and lightly pry all the way around. Or there is a proper tool.

Take that off, clean off the grease. There is a cotter pin, take that out, use needle nose pliers. There is a little crown that pulls off with no effort once the pin is out. Then a nut that isn't very tight, a big ass wrench or channel locks will take it off. A little spacer with 1 single key tooth in it, take that off. Watch out that the bearing doesn't pop off with it and hit the floor. At that point you should be able to pull the disc off. Watch the bearings one in the front, one in the back.

On the back side there are I think 4 14mm bolts holding the disc on, impact gun works well. Off comes the disc.

Merry Christmas.

[CarFreek]

title says it I need to get the hub off and I have no idea how. I took the brakes off the brake mount off then went uder the car and took the big nut off that looks to hold the hub in and nothing after hammering it

Do you mean the REAR stub axle?

[Kevin Kisseberth]

yeah not the front