Results 1 to 7 of 7
  1. #1
    Join Date
    Apr 2012
    Location
    Hayward CA
    Posts
    75

    Cool WTB: auto to manual swap parts

    I will be swapping my auto into a 5-speed in the next month and a half or so and im basically looking for all the parts necessary for the swap which are:

    Front piece of driveshaft from manual supra
    W58 transmission w/ proper bellhousing
    W58 clutch
    W58 flywheel and bolts
    manual transmission crossmember
    clutch slave cylinder and soft line
    clutch master cylinder and hard line that runs down body to bracket
    clutch pedal assembly
    brake pedal assembly
    Manual shifter
    Pilot bearing

    I'm in kind of a budget right now and would like to keep this as cheap as possible so even if you dont have all the parts, could you atleast telll me more or less for how much i should be able to find each part, or add how much you want for your parts to see how much this will come out to in total, if you give me a good price i WILL buy. I would like to add that i may take a little while to buy the actual parts since ive never bought from any forum members and dont know the procedure.
    I live in th sf bay area of CA. and i do not mind used parts as long as the work mechanically.
    Many thanks for your time and consideration!

  2. #2
    Join Date
    May 2005
    Location
    Far East Bay, Dublin, California.
    Posts
    1,521
    You live in the best part of the world to find used parts.
    There are five Pick n Pull yards within 50 miles of you.
    And I live 20 mins away. I have a few of the heavy things.
    I started the same swap on my '84 but I gave up and sold most of my stuff.
    There's more you might need to get and more to find out about.
    Like;
    The lower wiring harness, (battery to starter to transmission) so the cruise control and back up lights work.



    The manual trans car doesn't have this plug for auto trans wiring.
    That's when I stopped mine. (-: But I like my '84 auto transmission.

    And the tranny tunnel linkage hole is a different size.



  3. #3
    Join Date
    Apr 2012
    Location
    Hayward CA
    Posts
    75
    Actually, I read the FAQ a few times and what I listed is the basic parts, all the rest can be spliced, but seeing that you are so close, ill visit you one day to look at the parts, better safe than sorry right? Lol

  4. #4
    Join Date
    Apr 2012
    Location
    Hayward CA
    Posts
    75
    Are those all the parts you have or do you have others? Send me a message so I can give you my email.

  5. #5
    Join Date
    May 2005
    Location
    Far East Bay, Dublin, California.
    Posts
    1,521
    Front piece of driveshaft from manual supra
    W58 clutch
    W58 flywheel and bolts
    Manual transmission crossmember
    Clutch slave cylinder and soft line

    These are what I might still have. MIGHT.
    Pick & Pull is cheaper, but the work involved in pulling them isn't free.

  6. #6
    Join Date
    Apr 2012
    Location
    Hayward CA
    Posts
    75
    Are the clutch, flywheel, slave cylinder, and soft line new or used? I really am interested in buying them if you'll email me at fvaldez421@gmail.com,

    Thanks,
    Frank

  7. #7
    Join Date
    May 2005
    Location
    Far East Bay, Dublin, California.
    Posts
    1,521
    Oh God!

    Nothing is new.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
id=a6141150">