Results 1 to 10 of 119
-
08-14-2012, 01:04 PM #1
CelicaSupra.com Member
- Join Date
- Apr 2003
- Location
- Charlotte, NC
- Posts
- 325
Solid Mount Strut Bar In Development
Due to increased activity on the forum in this area, I would like to divuldge a current project that is going into the prototype stages in the coming week.
All components will be made from 6061-T6 aircraft grade aluminum.
Overall assembly will weight ~6lbs
Components will be water jetted and CNC machined
All welds will be TIG on Strut Tower Brackets
As the prototypes come in, and fitted I will update everyone on the status.
-Mitch-
-
08-14-2012, 02:28 PM #2
Member
- Join Date
- Jul 2012
- Location
- emmaus pa
- Posts
- 88
Let me know when it's available, and if it'll clear the rabid chimp intake pipe, as well as cost and I'll buy!
-
08-14-2012, 02:51 PM #3
CelicaSupra.com Member
- Join Date
- Aug 2009
- Location
- honolulu
- Posts
- 721
wow i have a rare ass tanabe strut bar.
but look at that beast. ill put it aside for this one!
-
08-14-2012, 02:58 PM #4
CelicaSupra.com Member
- Join Date
- Nov 2004
- Location
- Graham, WA
- Posts
- 5,080
For fitment issues, it should be adjustable somewhere, just keep that in mind.
-Chris
1983 Celipra GTS:
6M bored .50 over. 250cc injectors. Delta 272 regrind cams. Carter HF fuel pump.
Pacesetter header w/2.5" cutsom exhaust. Open air intake filter. 3" piping to TB. 65mm TB & ported AFM.
4:10 rear from Supra. BillyM shifter kit. Swapped most interior over to black. T3 camber plates.
935 Budget Coilover kit. KYB AGX struts. T3 Needle bearing upper perch kit. Eibach Sport rear supra springs. SF Ford TFI Performance coil.
Almost finished with the fiberglass hatch!
-
08-14-2012, 04:52 PM #5
CelicaSupra.com Member
- Join Date
- Apr 2003
- Location
- Charlotte, NC
- Posts
- 325
The bar connecting both towered is slotted to allow for deviation in the spacing between various cars. Once I receive the prototype I will install and address concerns of adjust ability and clearance.
Thanks for input and interest.
-
08-14-2012, 06:30 PM #6
CelicaSupra.com Member
- Join Date
- Oct 2005
- Location
- Ontario, Canada
- Posts
- 355
That looks awesome! Subscribed!
84 Supra P-type 5 Speed
RC Intake|2.5" Raptor Racing Exhaust|LJM Strut Bar
GC Front Coilovers/Dobinson Std. Height Rear Springs
-
08-14-2012, 06:53 PM #7
Member
- Join Date
- Sep 2011
- Location
- NC
- Posts
- 94
im down for one
~DIY~
do it yourself
88 supra(sold)
83 cressida(sold)
85 supra(dd)
-
08-14-2012, 08:33 PM #8
CelicaSupra.com Member
- Join Date
- Aug 2006
- Location
- ny
- Posts
- 124
im in also!
-
08-14-2012, 08:59 PM #9
Member
- Join Date
- Feb 2012
- Location
- Orange County, CA
- Posts
- 46
-
08-14-2012, 09:24 PM #10
CelicaSupra.com Member
- Join Date
- Jan 2010
- Location
- Bronx, NY
- Posts
- 502
Already have an LJM but interested in seeing how this turns out. Keep us updated.
Ronni
84 P-Type With some stuff done to it
"Guys, what are you going on about?
...intermittent attempt to shut off and you're having him check for BHG?"
--billyM
Reply With Quote
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
