Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Join Date
    Oct 2011
    Location
    georgia
    Posts
    44

    Exhaust Collector Gasket

    Hey guys, I've been hearing some funny noise come from my engine and after some inspection with my car buddy we figured out that I burned through the gasket between the manifold and the down pipe. I assume that this is called a collector gasket? My manifold is stock so if you guys could link me a replacement gasket i would really appreciate it because after 15 minutes on Google i couldn't find it.

    thanks.

  2. #2
    Join Date
    Jul 2007
    Location
    Dallas Center, IA
    Posts
    986
    I assume you still have a 5mge in the car? I took on rockauto.com and the site appears to have all the gaskets that I recall being between the exhaust manifold and cat. You might take a look there if you haven't already.
    MegaSquirted 62mm 7m @ 20psi on 91 octane
    410whp/411ftlbs

    Build Thread

  3. #3
    Join Date
    Aug 2010
    Location
    Colorado
    Posts
    843
    Good luck getting the bolts off...
    82 L Type

  4. #4
    Join Date
    Jul 2007
    Location
    Dallas Center, IA
    Posts
    986
    Quote Originally Posted by EwGoetsch View Post
    Good luck getting the bolts off...
    ^^^
    x2
    MegaSquirted 62mm 7m @ 20psi on 91 octane
    410whp/411ftlbs

    Build Thread

  5. #5
    Join Date
    May 2011
    Location
    Owen Sound, Ontario
    Posts
    2,617
    Torch!
    1982 Terra Cotta P-Type
    Need boost...

  6. #6
    Join Date
    Oct 2011
    Location
    georgia
    Posts
    44
    lol, i've already removed my down-pipe and back from the manifold once to replace a broke muffler.

  7. #7
    Join Date
    Oct 2011
    Location
    georgia
    Posts
    44
    uh iv'e looked on rock auto and i can't see one. isn't it like triangular shaped with 3 bolt holes at each corner and one large middle hole?

  8. #8
    Join Date
    Oct 2006
    Location
    St. Cloud, MN
    Posts
    2,847
    Between the manifold and downpipe? There are 2 pipes that start at the bottom of the exhaust manifold. The collector is a flange with those 2 pipes that mate up to the manifold. The gasket is actually 2 round, white, flat donuts made of some insulation material and a steel coil winding. They fit up inside of recesses in the manifold.

    Dan (DragonLady's husband) *RIP Tyler (2yo son lost to cancer)
    1986 P-type (Ruffian) black 6M 5 speed (formerly Lexusboy's), sitting.
    1986 P type MKII 2tone night blue met/silver met. 5MGE auto, waiting for summer.
    2005 Dodge Magnum Magnesium Pearl - new family car!
    2000 Chrysler Town & Country - Charcoal, family/stuff hauler

  9. #9
    Join Date
    Oct 2011
    Location
    georgia
    Posts
    44
    Road Ripper thats what im looking for, is there any chance you can link me a set? my exhaust is stock but im not sure the of diameter that the pipe is.

  10. #10
    Join Date
    Aug 2008
    Location
    baltimore
    Posts
    3,091
    its called exhaust seal ring, rockauto have the ones for the cat, i would suggest you to pulled them out and take it to a muffler shop.
    Edgar M.

    85 Two tones P-type 5 speed R.I.P

    84 White P-type 2JZ-GE 5 speed

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
id=a6141150">