Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Join Date
    Mar 2003
    Location
    Washington State
    Posts
    3,232

    Fall (down) Chimp Meat 2012 October 6th.

    Have had peeps asking about another Chimp Meat, and its time. I figure we'll start at the shop, spend a bit of time there, then head out on a fun run out in the boonies. Tentative plans are to drive out to my buddy's brewery in Graham. He opens at 3 pm, closes 7pm. Cheap, good beer. We'll spend a couple hours there, then head to Steilacoom for a BBQ and general monkey business (a couple miles from my old house in Lakewood).

    Initial plan is to meet at the shop around noon on October 6th, then hit the road around 1pm sharp. A direct route to the brewery is about 45 minutes, but we'll go the long way.

    Not much room to crash at my house, but there's grass (outside). If you get trashed, sleep on the carpet!


    Sound good?

    -Aaron
    http://www.rabidchimp.com aaron@rabidchimp.com


    http://www.facebook.com/RabidChimpPerformance

    2415 70th Ave West #31
    University Place, WA 98466

    Providing parts and service to Mk2 Supra owners since 1999
    Send me a text message: 253-237-2368

  2. #2
    Join Date
    Mar 2003
    Location
    Vancouver, BC
    Posts
    7,862
    I'll be there in my black 86, looking forward to it!
    Black 86 mk2 Project Car
    Terry's 82 Auto DD all original 5m 600k km KING
    New SDR 86 mk2 Daily User, Highway Cruiser AND Parking Lot Abuser in the works!
    Have an 85/86 Double Spoiler? Help Raptor's Double Wing Spoiler Reproduction Seal Kit become a reality!

  3. #3
    Join Date
    Dec 2009
    Location
    Issaquah, WA
    Posts
    1,315
    Wondering if I need to call in sick... I like hanging out with you guys, and Seamus owes me an ignition coil cover. Or you guys can all drive through the toyota parking lot so I can show off my friend to the guys who are always talking shit about my supra.
    -Taylor Nielsen|Contact Me!
    9/1981 Production Number 4,913 Black MK2 P-Type "Desiree" - BillyM shift kit - LED dash swap - Fog Light Mod - 7mgte Swap in progress
    Had a white '82 and a black '83 in the past...

  4. #4
    Join Date
    Nov 2011
    Location
    Oregon City, Oregon
    Posts
    115
    If I have the gas to get up there, I might be there too. It might be my first car meet. Lol
    Blue '85 P-type 5 speed- 1JZGTE Small single, 14 pounds of boost. For now..

  5. #5
    Join Date
    Jul 2011
    Location
    everett wa
    Posts
    235
    if my head gasket is fixed ill join in the fun

  6. #6
    Join Date
    Jan 2009
    Location
    Auburn, Washington
    Posts
    696
    Count me in.
    Silver 85 P-type Auto. 272,000 miles on chassis
    5mge built by Chimp, Bored .30 over

  7. #7
    Join Date
    Mar 2003
    Location
    Auburn, WA.
    Posts
    5,754
    A poo-flingin good time.
    86 SDR-"Shuttlecraft" 16" Drag dr-27 wheels, Coilover/AGX/Celica Arms front, Camber Mod/Cut Springs rear, Poly Bushings all around, Whiteline sway bars, 12" Homemade bbk front and rear, Weir Diff bushing, Pacesetter with custom RABID CHIMP mandrel bent 2.5 with Flowmaster resonator, short shifter, 5m-GZE using upgraded sc-14 Toyota supercharger, with Custom RABID CHIMP piping..

  8. #8
    Join Date
    Apr 2004
    Location
    Vancouver Island, BC Canada
    Posts
    685
    Damn, would have been great to make it down. Wont be able to this year though. Have fun all!!
    Chris
    Contact: Email Me!

  9. #9
    Join Date
    Mar 2003
    Location
    Vancouver, BC
    Posts
    7,862
    Good timing for this meet, that weekend is a long one up here (Canadian Thanksgiving). Longterm weather forecast is looking pretty good too.

    Whats up with Shawn these days? Any chance we can get him out for this?
    Black 86 mk2 Project Car
    Terry's 82 Auto DD all original 5m 600k km KING
    New SDR 86 mk2 Daily User, Highway Cruiser AND Parking Lot Abuser in the works!
    Have an 85/86 Double Spoiler? Help Raptor's Double Wing Spoiler Reproduction Seal Kit become a reality!

  10. #10
    Join Date
    Nov 2004
    Location
    Graham, WA
    Posts
    5,076
    Will be there, will also try to get tom to come too.
    -Chris

    1983 Celipra GTS:
    6M bored .50 over. 250cc injectors. Delta 272 regrind cams. Carter HF fuel pump.
    Pacesetter header w/2.5" cutsom exhaust. Open air intake filter. 3" piping to TB. 65mm TB & ported AFM.
    4:10 rear from Supra. BillyM shifter kit. Swapped most interior over to black. T3 camber plates.
    935 Budget Coilover kit. KYB AGX struts. T3 Needle bearing upper perch kit. Eibach Sport rear supra springs. SF Ford TFI Performance coil.
    Almost finished with the fiberglass hatch!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
id=a6141150">