Results 1 to 10 of 13
Thread: MKII Rotors
-
10-20-2012, 09:25 PM #1
Member
- Join Date
- Aug 2003
- Location
- Ocean, New Jersey
- Posts
- 46
MKII Rotors
Filling my shopping cart on Rock Auto with new Front brake parts and wheel bearings. I'm down to choosing Rotors but RockAuto is slim pickins. Whats good and whats junk?. vendors of choice?
Thanks for any Advise.
IntisLast edited by SupraPilot; 10-20-2012 at 10:57 PM.
Intis
86 MkII P type 5mge Stock. 6mge on the stand
-
10-21-2012, 12:21 AM #2
CelicaSupra.com Member
- Join Date
- May 2003
- Location
- Mt Vernon, MO
- Posts
- 2,063
Buy Brembo, and avoid slotted or drilled unless you are actually a race team running gaseous pads on a track (the slots/holes lose more to reduced surface area than you gain in bite).
Jan. 1982 Blue 'P' type - DD, 6MGE intake/exhaust/17"SquareWheels, etc.
1982 Terra Cotta 'P' type - 1UZFTE slowly progressing (high comp/low boost corner carver)
1983 Black P - Rust Weight Reduction Mod :P +400k and in donor status
1984 Red L - Fixing to make a come-back!
-
10-21-2012, 09:30 AM #3
Member
- Join Date
- Aug 2003
- Location
- Ocean, New Jersey
- Posts
- 46
Can't seem to find a vendor that has the Brembo Blank Rotors....only drilled and slotted which i don't want or need.....Got any contacts?
Originally Posted by lechner
Thanks,IntisIntis
86 MkII P type 5mge Stock. 6mge on the stand
-
10-21-2012, 02:36 PM #4
CelicaSupra.com Member
- Join Date
- Mar 2003
- Location
- SF Bay Area
- Posts
- 5,413
Check eBay... or RockAuto...
Regards,
Arch
'86 Supra MA67
Brullen 2.5" Exhaust, HKS Fly w/7MGE clutch,ST Springs, RC Intake & TB, 2.8GT & XX emblems, Factory Add on Rear Shoulder belts, Pioneer DEH-P2000 AM/FM/CD w/CDS-P5000 CD Player, Compomotive CXNs 8x16
-
10-21-2012, 04:18 PM #5
CelicaSupra.com Member
- Join Date
- Aug 2009
- Location
- Media pa
- Posts
- 1,250
I've been using the brembo non drilled/slotted from rockauto for about two years now. No problems at all.
Matt K.
84 P type - current DD pacesetter header, Rabid Chimp 2.5 exhaust,2.5 magnaflow converter,2.5 duel tip magnaflow muffler,kyb agx's 2jzge swapped
-
10-21-2012, 05:19 PM #6
CelicaSupra.com Member
- Join Date
- Aug 2009
- Location
- honolulu
- Posts
- 721
yea im also using brembo blanks. i love it!
-
10-21-2012, 06:20 PM #7
CelicaSupra.com Member
- Join Date
- May 2011
- Location
- Owen Sound, Ontario
- Posts
- 2,622
^ Ditto. Got lucky and snagged some off George. I think he's all out. Worth checking with him and Aaron (Rabid chimp) though...
Just a heads up... Napa (Can.) only carries economy rotors... no Brembo.Last edited by 1982 Dragon; 10-21-2012 at 07:56 PM. Reason: added
1982 Terra Cotta P-Type
Need boost...
-
10-21-2012, 06:20 PM #8
CelicaSupra.com Member
- Join Date
- May 2003
- Location
- Mt Vernon, MO
- Posts
- 2,063
Looks like Brembo only makes the rears now, so may be tough to find fronts.
-
10-21-2012, 07:51 PM #9
Member
- Join Date
- Aug 2003
- Location
- Ocean, New Jersey
- Posts
- 46
yup cant find brembo fronts.....to complete the job i just ordered a cheap set of beck/arnly front rotors to get by for now from rockauto with my other parts order. Originally Posted by lechner
Thanks to all for the replies.
IntisIntis
86 MkII P type 5mge Stock. 6mge on the stand
-
10-21-2012, 08:18 PM #10
CelicaSupra.com Member
- Join Date
- Mar 2003
- Location
- SF Bay Area
- Posts
- 5,413
Look up 1985 Supra on RockAuto right there...
BREMBO Part # 09502710 {#25282, 4351214080}
Front; Without Europe application; European Union Vehicles Only
* Stocked in outlying warehouse--shipping delayed up to 3 business days
+ Sold in packs of 2; Price reflects cost of each individual item, not the pack
Beck Arnley is a good 2nd choice!!Regards,
Arch
'86 Supra MA67
Brullen 2.5" Exhaust, HKS Fly w/7MGE clutch,ST Springs, RC Intake & TB, 2.8GT & XX emblems, Factory Add on Rear Shoulder belts, Pioneer DEH-P2000 AM/FM/CD w/CDS-P5000 CD Player, Compomotive CXNs 8x16
Reply With Quote
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
