Results 1 to 6 of 6
-
10-27-2012, 09:21 PM #1
Member
- Join Date
- May 2010
- Location
- San Antonio
- Posts
- 38
A/T Wiring harness vs. M/T Wiring Harness
I have a '87 7mte 5 Speed Manual Supra. My m/t ecu wiring harness is completely destroyed. Is there a difference between the '87 M/T and '87 A/T wiring harness? I found a A/T ecu wiring harness online, should I buy it? The only thing I can think of that is different is the reverse light and possibly the plugs that plug into the ecu.
-
10-30-2012, 09:13 AM #2
CelicaSupra.com Member
- Join Date
- Mar 2003
- Location
- PacNW
- Posts
- 9,837
Cra will not care if you use an auto or 5spd harness, as long as you have a 5speed car. Reverse lights are part of the car harness on a mkii.
84 P-type, 7mgte, too many other mods to list, 20k miles on the chassis. 83 L-type, 7mgte/A340 swap, again, to much to list. 85 P-type, basicaly stock, DD.
-
10-31-2012, 09:51 AM #3
Junior Member
- Join Date
- Sep 2012
- Location
- Eastern Ma
- Posts
- 9
He has a MKIII [87], not a MKII....
93 Celica Alltrac Turbo
91 Hilux V6 4WD DLX
86 Cressida
-
10-31-2012, 06:48 PM #4
CelicaSupra.com Member
- Join Date
- Nov 2004
- Location
- upstate Ny
- Posts
- 189
Then why is he on a MII Site??
Originally Posted by alltracman78
Lead,Follow,or Get the hell out of Way
-
10-31-2012, 08:48 PM #5
Boosting Mod
- Join Date
- Mar 2003
- Location
- Santa Clara & Stockton, CA
- Posts
- 6,661
My guess would be the auto wiring harness would probably work in a manual trans car, but not the other way around. You'll likely have a bunch of extra wiring for the transmission you won't use. Why not ask on supramania? I'm sure someone else probably did this there at some point.
-
11-07-2012, 05:38 PM #6
Member
- Join Date
- May 2010
- Location
- San Antonio
- Posts
- 38
Thanks SilverMK2
Reply With Quote
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
