Results 1 to 9 of 9
Thread: George, I need your help!
-
10-31-2012, 12:01 AM #1
George, I need your help!
Hey sorry to take up space on here but I didn’t know a better way to get in touch with you fast. I am trying to rap up my exhaust swap with your super sick 2.5" system. On your header at the bottom there are two plug holes. I know one is for the O2 sensor but what do I put in the other one? I don’t believe my old system had two holes but I sold it so cant check. If it’s not a necessity do you know the size and thread so I can get a bolt and plug it?
Really appreciate some help!
Cheers,
Cordell'85 SDR MKII 6M-GE 5-Speed: BUILD THREAD http://www.celicasupra.com/forums/sh...get-Resto-Mod.
(Gone and Gone!) '87 White 4Runner SR5 Turbo
2000' 4Runner Sport, 3.4L, E-Locker, 3" Sus Lift, ARB, Blacked out!
A Four wheeled Dragon will always be my Companion!
-
10-31-2012, 01:05 AM #2
Email is always best as I'm not on here often these days..the bottom of my sig has a link for contact info. Anyway...that's for next time; the other hole is to use a M18 x 1.5 wideband and included with the header is a cap for this with thread locker to lock it in place. It would have been in the bag I shipped with all the bolts/gaskets and hardware. Did you check to see if the cap is there, it would look like this:
-
10-31-2012, 10:25 AM #3
Sorry I posted late and from my phone. I have the lock-tite and the other hardware so i should have that plug, I will look again today and see if I can't find it. Thanks for the quick response!
Cheers,
Cordell'85 SDR MKII 6M-GE 5-Speed: BUILD THREAD http://www.celicasupra.com/forums/sh...get-Resto-Mod.
(Gone and Gone!) '87 White 4Runner SR5 Turbo
2000' 4Runner Sport, 3.4L, E-Locker, 3" Sus Lift, ARB, Blacked out!
A Four wheeled Dragon will always be my Companion!
-
10-31-2012, 03:13 PM #4
NP...let me know if you don't. I'm all out of header and downpipes and dont' have any more of the caps but can get more, unfortunatley you can get it a lot faster than me as my supplier is 25miles away from me.
-
11-01-2012, 06:19 PM #5
Hey George, I looked an couldn't find the cap. If you could point me in the right direction for ordering one I would apperciat it.
~Cordell'85 SDR MKII 6M-GE 5-Speed: BUILD THREAD http://www.celicasupra.com/forums/sh...get-Resto-Mod.
(Gone and Gone!) '87 White 4Runner SR5 Turbo
2000' 4Runner Sport, 3.4L, E-Locker, 3" Sus Lift, ARB, Blacked out!
A Four wheeled Dragon will always be my Companion!
-
11-02-2012, 02:45 AM #6
Go to an auto parts or hardware store with the measurements it will be like .50cents
84' p-type - 64k 1 owner DD
86' p-type - Forced into a pole.
86' GT-S corolla - Neglected
91' 3000gt vr4 581whp - Sold


-
11-02-2012, 08:15 AM #7
Just print that picture I posted above, go to any exhaust shop and most part stores and tell them that it's M18 x 1.5...it should be VERY cheap.
-
11-04-2012, 01:33 PM #8
Got one, it was $2.50. Fired the car up for the first time and it sounds great. Thanks for your help.
~Cordell'85 SDR MKII 6M-GE 5-Speed: BUILD THREAD http://www.celicasupra.com/forums/sh...get-Resto-Mod.
(Gone and Gone!) '87 White 4Runner SR5 Turbo
2000' 4Runner Sport, 3.4L, E-Locker, 3" Sus Lift, ARB, Blacked out!
A Four wheeled Dragon will always be my Companion!
-
11-04-2012, 07:48 PM #9
Awesome...glad you were able to get one cheap. If you didn't please remember to use the loctite on there as those are known to pop off and scare the crap out of peeps when they do so. This is why I include it.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)


Reply With Quote








