[Gauging Interest] MK2 Reproduction Rubber Hatch GLASS Seals - Page 7

Poll: How much would you be willing to pay for Reproduction Hatch Glass Seals

Be advised that this is a public poll: other users can see the choice(s) you selected.

Page 7 of 7 FirstFirst ... 567
Results 61 to 69 of 69
  1. #61
    CelicaSupra.com Member SupraFiend's Avatar
    Join Date
    Mar 2003
    Location
    Vancouver, BC
    Posts
    9,016
    Ahh it just replaces the trim, not the urethane. It looked like the one piece windshield seals vettes and other GMs and such use.
    Black 86 mk2 Project Car
    New SDR 86 mk2 Daily User, Highway Cruiser AND Parking Lot Abuser in the works!

  2. Remove Advertisements
    CelicaSupra.com
    Advertisements

  3. #62
    Hey guys...for the meantime can we just keep this post on topic. If someone wants to start a thread on the windshield trim posted above please go ahead as I'm sure others will want to know about it.

  4. #63
    FYI...group buy will start by the end of the weekend. It will be a very short group buy (2 weeks) as I need to expedite the order as soon as possible so it doesn't conflict with other projects. I'm just finalizing the shipping which unfortunately is a little more than I hoped...bank for pricing to be in the $200 + Shipping(from Toronto) price range. I know that means many of you wont' be participating but at $160 + shipping it's just not worth my time considering I have to front a lot to get these done.

  5. Remove Advertisements
    CelicaSupra.com
    Advertisements

  6. #64
    CelicaSupra.com Member Dustin's Avatar
    Join Date
    Feb 2010
    Location
    High Point, NC
    Posts
    1,213

    Re: [Gauging Interest] MK2 Reproduction Rubber Hatch GLASS Seals

    Awesome news, man!

    - Dustin -
    -Dustin-
    1985 Celica Supra, 6mgte, 349whp/352tq at 16psi. Build Thread: Hidden Content
    Hidden Content

  7. #65
    Founding Member pdupler's Avatar
    Join Date
    Mar 2003
    Location
    Fort Worth, TX
    Posts
    5,665
    Quote Originally Posted by Funkycheeze View Post
    The machines that they use to make windshields are programmed for the curvature profile and size to cut after bending. No moulds required. So it is no problem to get new windshields, and shouldn't ever be.

    Also that rubber seal looks really good. It is hard to get the stock trim in good shape, and it is a bear to install properly.
    Last time I bought a windshield in 2011, it was not easy. Called every glass shop in the yellow pages - no luck. Finally found a windshield in stock about 800 miles away. I also got lucky once and found a very fresh one in a celica in salvage yard and managed to remove it without damage, but that's been nearly 10 years ago. You don't realize how bad your windshield really is until you put in a fresh new glass. I'm always amazed that nothing makes a car feel new again like a clear view over the hood. Really appreciate everyone's effort in getting reproduction stuff made.
    Phil D.
    85 Silver 6m-gte, completed 2000

    "I always observe the speed limit. I see those DAMNED signs everywhere."

  8. #66
    CelicaSupra.com Member Deanfun's Avatar
    Join Date
    May 2003
    Location
    Fort McMurray, Alberta, Canada
    Posts
    3,199
    Quote Originally Posted by pdupler View Post
    Last time I bought a windshield in 2011, it was not easy. Called every glass shop in the yellow pages - no luck. Finally found a windshield in stock about 800 miles away. I also got lucky once and found a very fresh one in a celica in salvage yard and managed to remove it without damage, but that's been nearly 10 years ago. You don't realize how bad your windshield really is until you put in a fresh new glass. I'm always amazed that nothing makes a car feel new again like a clear view over the hood. Really appreciate everyone's effort in getting reproduction stuff made.
    I just ordered a windshield from a glass place in Vancouver, BC. They didn't seem to have too much trouble finding good glass. Even had the option of with/without the antenna. Of course... it wasn't cheap.
    Dean L.
    1985 Toyota Supra - Hidden Content
    1987 Toyota Land Cruiser BJ73
    2007 Lexus LX470

  9. #67
    CelicaSupra.com Member Dustin's Avatar
    Join Date
    Feb 2010
    Location
    High Point, NC
    Posts
    1,213

    Re: [Gauging Interest] MK2 Reproduction Rubber Hatch GLASS Seals

    Did no one read George's earlier post?! (#62 - second from top)
    Quote Originally Posted by RaptorRacing View Post
    Hey guys...for the meantime can we just keep this post on topic. If someone wants to start a thread on the windshield trim posted above please go ahead as I'm sure others will want to know about it.
    - Dustin -
    -Dustin-
    1985 Celica Supra, 6mgte, 349whp/352tq at 16psi. Build Thread: Hidden Content
    Hidden Content

  10. #68
    Junior Member
    Join Date
    Dec 2011
    Location
    Ottawa, ON
    Posts
    24
    Awesome news George!!

    How long after the group buy do you think it will take for them to be ready to ship out?

  11. #69
    Group Buy is posted here ...thanks folks.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts