Fuel Pump replacement

See Jim King's write-up here

Mk3 Alternator Upgrade

See Dave R's write-up here

Refinished valve covers

Want powder coated valve covers with your choice of color and finish? O.E.M. wrinkle finish, or high gloss, send your cleaned covers to Rabid Chimp and they will send you a custom color set for $85.00 - website: www.rabidchimp.com email: aaron@rabidchimp.com

High Power 5MGE

• Port, polish, 3-angle valve job w/ stronger valves and springs for cylinder head
• More aggressive cams, the more HP you get from them the rougher the idle
• Bore out cylinders w/ bigger pistons and crank
• Thinner head gasket to raise compression
• Retune AFM and/or increase fuel pressure
• Adjustable cam gears for tuning
• Bore out throttle body w/ larger intake pipe and a ram air setup
• Nitrous. 50-75shot is the most people have run on these motors.
• For 82-83 cars, use the 84+ pistons to increase compression from 8.8 to 9.2.

6MGE Transplant

• Has crank of 7M, adds ~25HP
• Companies have been known to lie about mileage on engine, buyer beware
• Complaints of "check engine" light coming on >80mph has been rectified by swapping in a 6M ECU
• You might need to use your 5M EGR and upper intake chamber, depending on if your place of residence requires emissions tests

5MGTE Hybrid

• Look at Aaron Garney's tutorial here

6MGTE Hybrid

• Look at Phil Dupler's photos here 

7MGTE Transplant

• Jim King- see his *excellent* tutorial here
• Reg Reimer- the pioneer of this transplant.  See his page here.
• Andy S.- see his thorough write up with wiring diagrams here.

1JZGTE Transplant

• Frank- see his site here

2JZGTE Transplant

• Norbie- see his tutorial here