MKII Supra triangulated strut tower bar! 82-85 [Archive] - Toyota CelicaSupra Forums

: MKII Supra triangulated strut tower bar! 82-85

04-16-2003, 09:01 AM
Newly developed triangulated strut tower bar for all MKII Supras. Solid design eliminates bar flex at hinged joints, bolts to fire wall for maximum chassis rigidty. Immediately noticeable difference in steering input and cornering. Check out the link below for some pictures, feel free to email me at [email protected] for more info or call 519-940-9225. Take care


04-16-2003, 10:52 AM
ATTN: Chris Wick!!!!

Why is this in the Turbo discussion section??? This needs to be moved to the Brakes & Suspension section!!!!!!

Guru, It's a nice looking bar, but I noticed that the front part of the bar is very flat & level, not slightly curved like the Cusco bar & the LJM bar. This section just BARELY clears the intake plenium & it is sitting pretty close to the tops of the cam covers. While this might be fine for a 5MGE or 6MGE, this might be a issue for those who have done 7MGTE conversions. Especially if it will clear the intercooling piping, the cam covers, and the coil packs, which are in front of the motor???? Any idea if this STB will clear the top of a 7MGTE???

For those who are keeping the 5M/6M, some of us are running custom intake pipes, like the Aaron Garney/Rabid Chimp pipe. Any idea if the STB will clear this pipe???

In some cases for those who have done a turbo conversion on their 5M & 6M's, the piping might be slightly different. Any idea if it will clear any of the piping going from the intercooler to the throttle body??

So basically, will this bar clear any other motor configurations, besides the basic 5MGE/6MGE??? Has it been test fitted on other motor configurations yet??

04-16-2003, 11:21 AM
Yea, definitely looks nice, but as Chris said, it doesn't look like it will clear anything other than a 5m/6m. Any chance of making one that will?


04-16-2003, 11:24 AM
Moved. Calm down Eng :mrgreen: