true trac writeup - Page 26

Page 26 of 26 FirstFirst ... 16242526
Results 251 to 257 of 257
  1. #251
    Boosting Mod SilverMk2's Avatar
    Join Date
    Mar 2003
    Location
    Santa Clara & Stockton, CA
    Posts
    8,061
    The retaining rings are still available from Toyota for a little over a dollar each. P/n 90521-29002

  2. Remove Advertisements
    CelicaSupra.com
    Advertisements

  3. #252
    Member
    Join Date
    Aug 2016
    Location
    cottonwood
    Posts
    43
    Nice thank you very much for that!

  4. #253
    Junior Member ShadeThoonigans's Avatar
    Join Date
    Dec 2017
    Location
    kodak Tennessee
    Posts
    9
    So who is the best source to purchase the tru-trac center chunk from?

    summit?

    instead of reading a bunch of stub axles issues was curious if anyone may have a link or hell even a full diff already together they would sell im in a purchasing mood and my Ol red is in need....


    Destroyed it this past weekend after a small burnout at the track....
    Just got her back from victory motorsports where she came back to me make 442hp with 382 tq (7mgte 91mm turbo,r154, act extreme hd clutch, ms3x standalone)
    and i guess the diff didnt like it lol......

    Needing to get this back together so i can go play more lol

  5. Remove Advertisements
    CelicaSupra.com
    Advertisements

  6. #254
    CelicaSupra.com Member williamb82's Avatar
    Join Date
    Mar 2003
    Location
    Spring Hill, Fl.
    Posts
    15,000
    Just searched and cheapest I found it was only $5 cheaper than Summit, and it was a company I never heard of. I would go with Summit. Dont forget you need carrier bearings with the 50mm ID. 89 4wd 4 runner front carrier bearings is the application.
    william
    Black 84 7mgte/R154, MS2, truetrac, bbk, etc...soon to have 2jzgte and t56
    Blue 85 Beater. TRD Header, HKS Exhaust, custom 3in intake pipe, cone filter
    Black 86 Triple Weber 6m Eventually
    Rusty 85 Frankenstein 6M/w58 with DIYPNP

  7. #255
    CelicaSupra.com Member Funkycheeze's Avatar
    Join Date
    Feb 2004
    Location
    Calgary, Alberta, Canada
    Posts
    2,441
    90368-50006 are the carrier bearings you need. I have struggled with any aftermarket source for these, but the Yukon gear bearing and seal rebuild kits for 4 runner/puickup standard rotation 7.5" FRONT diffs will work, except for the side seals which you can get as Timken 2009 or Timken 2009S

    *EDIT* make sure the Yukon kit is for a V6 4 runner / pickup, standard rotation front diff so it has the 50mm carrier bearings.
    Last edited by Funkycheeze; 07-10-2019 at 11:01 AM.
    '84 P-type, 5spd, Super red, black/grey leather - 2JZGTE swap, Precision 6262 on cast manifold, ECUmaster black with 875cc/min injectors, 465 WHP at 17 psi, built R154 with OS Giken twin plate, one piece driveshaft with 1310 joints, Truetrac with 3.73 R&P, 450 lb/in front coilovers, 300lb/in rear springs, Image BBM wheels 17x8 and 18x10, 4 corner BBK, AGX shocks, Whiteline bars, poly bushings, T3 GTX2 front control and steering arms etc. etc.

  8. #256
    CelicaSupra.com Member AJ's Avatar
    Join Date
    Mar 2003
    Location
    SF Bay Area
    Posts
    7,335
    Good to know Thanks!!

    Quote Originally Posted by Funkycheeze View Post
    90368-50006 are the carrier bearings you need. I have struggled with any aftermarket source for these, but the Yukon gear bearing and seal rebuild kits for 4 runner/puickup standard rotation 7.5" FRONT diffs will work, except for the side seals which you can get as Timken 2009 or Timken 2009S
    Regards,
    Arch
    '86 Supra MA67
    Brullen 2.5" Exhaust, HKS Fly w/7MGE clutch,ST Springs, RC Intake & TB, 2.8GT & XX emblems, Factory Add on Rear Shoulder belts, Pioneer DEH-P2000 AM/FM/CD w/CDS-P5000 CD Player, Compomotive CXNs 8x16

  9. #257
    CelicaSupra.com Member Funkycheeze's Avatar
    Join Date
    Feb 2004
    Location
    Calgary, Alberta, Canada
    Posts
    2,441
    Make sure the Yukon kit is for a front diff from a V6 truck so it has the 50mm carrier bearings. I updated my post above.
    '84 P-type, 5spd, Super red, black/grey leather - 2JZGTE swap, Precision 6262 on cast manifold, ECUmaster black with 875cc/min injectors, 465 WHP at 17 psi, built R154 with OS Giken twin plate, one piece driveshaft with 1310 joints, Truetrac with 3.73 R&P, 450 lb/in front coilovers, 300lb/in rear springs, Image BBM wheels 17x8 and 18x10, 4 corner BBK, AGX shocks, Whiteline bars, poly bushings, T3 GTX2 front control and steering arms etc. etc.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts