Results 1 to 9 of 9
-
12-10-2019, 04:43 PM #1CelicaSupra.com Member
- Join Date
- May 2005
- Location
- N. Seattle.
- Posts
- 5,258
'84 Supra triangle interior garnish?
The DISCONTINUED part that covers the rear view mirror bolts.
I lost an excellent source for OEM part numbers.
It had illustrations of a LOT of plastic interior parts.
A site in Japan.
Toyota completion guide?
They don't have an arm rest pad OR a battery hold down.Dave in Seattle. I keep LATE hours.Hidden Content
'84 type "L" ,Auto ,daily driver. Dk blue. -
Sponsored Links Remove Advertisements
-
12-10-2019, 05:12 PM #2CelicaSupra.com Member
- Join Date
- Mar 2003
- Location
- Auburn, WA.
- Posts
- 6,091
Dave, do you mean toyodiy.com?
86 SDR-"Shuttlecraft" 16" Drag dr-27 wheels, T3Coilover front, Camber Mod/Cut Springs rear, Poly Bushings all around, Whiteline sway bars, 13" bbk front, and 12" bbk rear, 1gz-fe V12 swap. 84 blue two tone 1uz swap. Whitelines and dobinsons and advanced iron oxide mass reduction. -
12-10-2019, 05:32 PM #3CelicaSupra.com Member
- Join Date
- May 2005
- Location
- N. Seattle.
- Posts
- 5,258
Yes,but I'm LOST in a pile of unfamiliar names of the interior parts.
Originally Posted by CarFreek
https://www.toyodiy.com/parts/p_U_19...PQFA_6401.html
I need a blown up illustration of the parts involved,Mike.
I LOST the link to what I was needing.
Door trim "garnish?"Dave in Seattle. I keep LATE hours.Hidden Content
'84 type "L" ,Auto ,daily driver. Dk blue. -
Sponsored Links Remove Advertisements
-
12-10-2019, 05:43 PM #4CelicaSupra.com Member
- Join Date
- Mar 2003
- Location
- Auburn, WA.
- Posts
- 6,091
I thought I saw a description of garnish or panel last time I looked for them. It's been a while.
86 SDR-"Shuttlecraft" 16" Drag dr-27 wheels, T3Coilover front, Camber Mod/Cut Springs rear, Poly Bushings all around, Whiteline sway bars, 13" bbk front, and 12" bbk rear, 1gz-fe V12 swap. 84 blue two tone 1uz swap. Whitelines and dobinsons and advanced iron oxide mass reduction. -
12-10-2019, 06:01 PM #5CelicaSupra.com Member
- Join Date
- May 2005
- Location
- N. Seattle.
- Posts
- 5,258
Arch has a microfish with arrows and part numbers.
Ain't that important 'cause I can just glue them back on without the tabs.
3 M VHB tape will work,if it's clean.Dave in Seattle. I keep LATE hours.Hidden Content
'84 type "L" ,Auto ,daily driver. Dk blue. -
12-10-2019, 07:02 PM #6Boosting Mod
- Join Date
- Mar 2003
- Location
- Santa Clara & Stockton, CA
- Posts
- 8,091
Toyodiy has pics if you register. It's 67491-14070 and 67492-14070. And you think usdm things are available in Japan that aren't in the US?
if they're out of stock in the US that ship them from Japan. If you ever order anything and it takes a few weeks to come in it probably came from Japan.
-
12-10-2019, 07:34 PM #7CelicaSupra.com Member
- Join Date
- Mar 2003
- Location
- Auburn, WA.
- Posts
- 6,091
Front door lower frame garnish...
86 SDR-"Shuttlecraft" 16" Drag dr-27 wheels, T3Coilover front, Camber Mod/Cut Springs rear, Poly Bushings all around, Whiteline sway bars, 13" bbk front, and 12" bbk rear, 1gz-fe V12 swap. 84 blue two tone 1uz swap. Whitelines and dobinsons and advanced iron oxide mass reduction. -
12-10-2019, 07:41 PM #8CelicaSupra.com Member
- Join Date
- May 2005
- Location
- N. Seattle.
- Posts
- 5,258
I found something,but I cannot translate.
https://www.monotaro.com/monotaroMain.py
Part #'s...GREAT!
Haven't found a pair,yet.
https://www.toyotapartsdeal.com/oem/...-glass,,67492ALast edited by ddd228; 12-10-2019 at 08:10 PM. Reason: N.A. Well,I knew that.
Dave in Seattle. I keep LATE hours.Hidden Content
'84 type "L" ,Auto ,daily driver. Dk blue. -
Yesterday, 11:53 PM #9CelicaSupra.com Member
- Join Date
- Aug 2009
- Location
- Nova Scotia
- Posts
- 3,829
I prob have an extra set of triangles kicking around that I was gonna make a mold from upon DIS-C, but they otta be fairly easily 3D printed.
Hidden Content
DreadBull
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
