Transmission removal

Results 1 to 10 of 11
\r\n
\r\n
\r\n
\r\n \r\n
\r\n goldenfri\r\n \r\n
\r\n goldenfri is offline\r\n\r\n \r\n
\r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
Join Date
Oct 2018
\r\n
Location
Maryland
\r\n \r\n
Posts
10
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n

\r\n Transmission removal\r\n

\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n I am going to remove my trans to do a rear main seal and the TSRM says I need to drain my coolant, remove upper radiator hose and remove steering gear housing etc. At first glance it doesn\'t appear that all that should be necessary. Am I missing something?\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n
\r\n -' + '->\r\n
\r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
\r\n
\r\n
\r\n\r\n'; pd[1313407] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n ddd228\r\n \r\n
    \r\n ddd228 is offline\r\n\r\n \r\n
    \r\n \r\n CelicaSupra.com Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n ddd228\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    May 2005
    \r\n
    Location
    N. Seattle.
    \r\n \r\n
    Posts
    5,238
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Not at all. They also say to disconnect the negative battery cable. No reason to.
    \nWith an automatic there are cooler lines.Big deal.
    \n Coolant is not involved at all with a transmission.
    \nA tail shaft "cork" is good to avoid a big mess.A plastic pill bottle may work,of the correct size.
    \n
    \nhttp://www.cygnusx1.net/Supra/Librar...Section=MT&P=3\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    Dave in Seattle. I keep LATE hours.Hidden Content
    \r\n\'84 type "L" ,Auto ,daily driver. Dk blue.
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1313411] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #3\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n goldenfri\r\n \r\n
    \r\n goldenfri is offline\r\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Oct 2018
    \r\n
    Location
    Maryland
    \r\n \r\n
    Posts
    10
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Thanks for confirming I don\'t need to do all that, I was thinking it might be needed if you tilted the engine back.
    \r\n
    \r\nyea thats the page of the manual I was looking at, its not very uh... "verbose" lol. Emptied the trans so don\'t need worry about fluid. \r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1313409] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #4\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n SilverMk2\r\n \r\n
    \r\n SilverMk2 is offline\r\n\r\n \r\n
    \r\n \r\n Boosting Mod\r\n \r\n \r\n \r\n \r\n \r\n \r\n SilverMk2\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2003
    \r\n
    Location
    Santa Clara & Stockton, CA
    \r\n \r\n
    Posts
    8,074
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n No you don\'t need to do anything of that\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1313415] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #5\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n SilverMk2\r\n \r\n
    \r\n SilverMk2 is offline\r\n\r\n \r\n
    \r\n \r\n Boosting Mod\r\n \r\n \r\n \r\n \r\n \r\n \r\n SilverMk2\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2003
    \r\n
    Location
    Santa Clara & Stockton, CA
    \r\n \r\n
    Posts
    8,074
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Just make sure you have about 3 ft worth of extensions to remove the starter and upper bell housing bolts. You\'ll probably want to remove the stock fan if you still have the fan shroud.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1313431] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #6\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n williamb82\r\n \r\n
    \r\n williamb82 is offline\r\n\r\n \r\n
    \r\n \r\n CelicaSupra.com Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n williamb82\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2003
    \r\n
    Location
    Spring Hill, Fl.
    \r\n \r\n
    Posts
    15,001
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Buy a 24-36in long extension, then you can use a socket and ratchet with the ratchet back by the tail housing after you remove the trans cross member to get the bolts out. Or an impact if you have a 1/2in drive extension that long.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    william
    \r\nBlack 84 7mgte/R154, MS2, truetrac, bbk, etc...soon to have 2jzgte and t56
    \r\nBlue 85 Beater. TRD Header, HKS Exhaust, custom 3in intake pipe, cone filter
    \r\nBlack 86 Triple Weber 6m Eventually
    \r\nRusty 85 Frankenstein 6M/w58 with DIYPNP
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1313597] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #7\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n goldenfri\r\n \r\n
    \r\n goldenfri is offline\r\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Oct 2018
    \r\n
    Location
    Maryland
    \r\n \r\n
    Posts
    10
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n You guys didn\'t warn me about that top starter bolt, that guy is an a-hole haha. Got the trans out though. \r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1313631] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #8\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n mutantcolors\r\n \r\n
    \r\n mutantcolors is offline\r\n\r\n \r\n
    \r\n \r\n CelicaSupra.com Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n mutantcolors\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Nov 2016
    \r\n
    Location
    USA
    \r\n \r\n
    Posts
    667
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n We ended up double-wrenching the top bell housing bolts when we ripped my 5M out. Not easy but we got there.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n\r\n \r\n\r\n \r\n\r\n \r\n
    \r\n Attached Images Attached Images\r\n \r\n
    \r\n \r\n\r\n \r\n\r\n \r\n\r\n
    \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1313637] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #9\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n williamb82\r\n \r\n
    \r\n williamb82 is offline\r\n\r\n \r\n
    \r\n \r\n CelicaSupra.com Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n williamb82\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2003
    \r\n
    Location
    Spring Hill, Fl.
    \r\n \r\n
    Posts
    15,001
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Instructions for the starter are on this post.
    \n
    \nhttps://www.celicasupra.com/forums/s...l=1#post440870\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    william
    \r\nBlack 84 7mgte/R154, MS2, truetrac, bbk, etc...soon to have 2jzgte and t56
    \r\nBlue 85 Beater. TRD Header, HKS Exhaust, custom 3in intake pipe, cone filter
    \r\nBlack 86 Triple Weber 6m Eventually
    \r\nRusty 85 Frankenstein 6M/w58 with DIYPNP
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1313639] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #10\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n goldenfri\r\n \r\n
    \r\n goldenfri is offline\r\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Oct 2018
    \r\n
    Location
    Maryland
    \r\n \r\n
    Posts
    10
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Some good stuff in there, thanks! I did the starter from underneath, I see now that it would have been easier from above. haha
    \n
    \nNow to find the oil leak/leaks. I assumed it was the rear main seal, but the EGR seems suspiciously very oily. I might have to do all the seals in that area.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1313653] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #11\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n mutantcolors\r\n \r\n
    \r\n mutantcolors is offline\r\n\r\n \r\n
    \r\n \r\n CelicaSupra.com Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n mutantcolors\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Nov 2016
    \r\n
    Location
    USA
    \r\n \r\n
    Posts
    667
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n I\'d just do everything while it\'s apart.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; // next/previous post info pn[1313405] = "1313653,1313407"; pn[0] = ",1313405"; pn[1313407] = "1313405,1313411"; pn[1313411] = "1313407,1313409"; pn[1313409] = "1313411,1313415"; pn[1313415] = "1313409,1313431"; pn[1313431] = "1313415,1313597"; pn[1313597] = "1313431,1313631"; pn[1313631] = "1313597,1313637"; pn[1313637] = "1313631,1313639"; pn[1313639] = "1313637,1313653"; pn[1313653] = "1313639,1313405"; // cached usernames pu[0] = guestphrase; pu[40497] = "goldenfri"; pu[2729] = "ddd228"; pu[10] = "SilverMk2"; pu[62] = "williamb82"; pu[34202] = "mutantcolors"; // -->

    Threaded View

    Previous Post Previous Post Next Post Next Post
    1. #1
      Junior Member
      Join Date
      Oct 2018
      Location
      Maryland
      Posts
      10

      Transmission removal

      I am going to remove my trans to do a rear main seal and the TSRM says I need to drain my coolant, remove upper radiator hose and remove steering gear housing etc. At first glance it doesn't appear that all that should be necessary. Am I missing something?

    Thread Information

    Users Browsing this Thread

    There are currently 1 users browsing this thread. (0 members and 1 guests)

      Posting Permissions

      • You may not post new threads
      • You may not post replies
      • You may not post attachments
      • You may not edit your posts