Toyota Celica Supra Forum banner

Extend a seat

1K views 1 reply 2 participants last post by  ddd228 
#1 ·
Hi guys, anybody figure out a good way to get the mk2 p type front seats to move back another inch or two. I am a tall guy, and could really use another 1 to 2 more inches of leg room. A company called extend a seat makes seat rail extenders for many cars, in fact i used them on a 2006 mustang that i had, but they don’t make them for the supra, and the cost would be prohibitive for a one off.
Thanks Guys... Semper Fi
 
#2 ·
You are too tall? Like John De Lorean?
Did you look into BAR BACKS for motorcycles?
You will have to modify the bar backs to fit 10 mm bolts.
The front mounts will be a challenge to mod. Rear ones:easy.
I couldn't see over my hood,so I jacked UP the drivers seat with 1 " spacers.
Just in the rear mounts.

I own a stick welder/buzz box.
Just take the seat all of the way out to see what you can do.
I take mine out every time that I change the seat cover.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top