Stroked stock 2jzgte crank

Results 1 to 4 of 4
\r\n
\r\n
\r\n
\r\n \r\n
\r\n shawnyboe\r\n \r\n
\r\n shawnyboe is offline\r\n\r\n \r\n
\r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n shawnyboe\'s Avatar\r\n \r\n \r\n \r\n
\r\n
\r\n
Join Date
May 2013
\r\n
Location
vallejo,ca
\r\n \r\n
Posts
26
\r\n \r\n
\r\n \r\n \r\n \r\n \r\n
\r\n
\r\n
\r\n \r\n \r\n

\r\n Stroked stock 2jzgte crank\r\n

\r\n \r\n\r\n\r\n \r\n \r\n
\r\n
\r\n
\r\n Was wondering if it’s possible to get my stock GTE CRANK TO 3.1-3.4 ??\r\n
\r\n
\r\n\r\n \r\n
\r\n
\r\n \r\n
\r\n
\r\n
\r\n
\r\n -' + '->\r\n
\r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
\r\n
\r\n
\r\n\r\n'; pd[1315973] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n SilverMk2\r\n \r\n
    \r\n SilverMk2 is offline\r\n\r\n \r\n
    \r\n \r\n Boosting Mod\r\n \r\n \r\n \r\n \r\n \r\n \r\n SilverMk2\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2003
    \r\n
    Location
    Santa Clara & Stockton, CA
    \r\n \r\n
    Posts
    8,039
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Yes. People have done 3.2 with the Honda bearings and custom rods on an offset ground crank. Most people just do the 3.4l with new crank once you get to that 4 digit power level though.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1315975] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #3\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n shawnyboe\r\n \r\n
    \r\n shawnyboe is offline\r\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n shawnyboe\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    May 2013
    \r\n
    Location
    vallejo,ca
    \r\n \r\n
    Posts
    26
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Wasup Aaron! Where would I go to get the crank started ? Machine shop I suppose ? And would u happen to know the formula for displacement lol ? I’m sure I’m gonna have to fill out a new crank measurement sheet at the shop\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; pd[1316011] = '\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #4\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n SilverMk2\r\n \r\n
    \r\n SilverMk2 is offline\r\n\r\n \r\n
    \r\n \r\n Boosting Mod\r\n \r\n \r\n \r\n \r\n \r\n \r\n SilverMk2\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Mar 2003
    \r\n
    Location
    Santa Clara & Stockton, CA
    \r\n \r\n
    Posts
    8,039
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n https://www.supraforums.com/threads/...er-kit.694741/\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n'; // next/previous post info pn[1315971] = "1316011,1315973"; pn[0] = ",1315971"; pn[1315973] = "1315971,1315975"; pn[1315975] = "1315973,1316011"; pn[1316011] = "1315975,1315971"; // cached usernames pu[0] = guestphrase; pu[18872] = "shawnyboe"; pu[10] = "SilverMk2"; // -->

    Threaded View

    Previous Post Previous Post Next Post Next Post
    1. #1
      Junior Member shawnyboe's Avatar
      Join Date
      May 2013
      Location
      vallejo,ca
      Posts
      26

      Stroked stock 2jzgte crank

      Was wondering if it’s possible to get my stock GTE CRANK TO 3.1-3.4 ??

    Thread Information

    Users Browsing this Thread

    There are currently 2 users browsing this thread. (0 members and 2 guests)

      Posting Permissions

      • You may not post new threads
      • You may not post replies
      • You may not post attachments
      • You may not edit your posts