Results 1 to 3 of 3
09-08-2019, 03:02 PM #1
- Join Date
- May 2019
5M block 7M turbo head will it work?
I am curious can you use your existing MK2 Supra block harness and other stuff and bolt a 7M head on with Turbo component's? I heard there pretty much the same engine? interested to know,
Sponsored Links Remove Advertisements
09-16-2019, 10:39 PM #2
You can bolt the 7mgte turbo manifold to the 5m head, its been done a million times. Search the forums
7m head will bolt to the 5m block but the 5m pistons are domed for the 2v head. The compression ration would be extremely high.
You can put 7m pistons in a 5m block.1984 White MKII P-Type, 2jzge
1985 Black P-type 1jzgte vvti
1996 sc300 2jzget
Need precision welding?
Yesterday, 11:16 AM #3
Bigger problem you'll have is getting all the drive belts to line up. The 5M crank pulley won't fit on the 6M crankshaft. This has been done before though. After all the effort all you'll end up with is a slightly less powerful 7M with weaker rods if you use the stock ones.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)