Do we need more catback options? - Page 2

Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19
  1. #11
    CelicaSupra.com Member 82Spearco's Avatar
    Join Date
    Mar 2003
    Location
    Hotlanta!!!
    Posts
    1,183
    This was something that Jim King talked about doing over a year ago, but has gotten buried under the BBK's, RCA's, Short throw shifters, etc.

    I think your pricing is decent for SS. A good option for DIY'ers. I was going to go the JK route, but it never transpired. I finally broke down and bought the Brullen. My reasons for buying the Brullen were two fold, it was a complete SS exhaust, not aluminized, and it had a resonator to quiet it down. However, it was a quite a bit more expensive than the Chimpy.
    Chad Z. "CZTOY"
    '82 Black P-type, Spearco Turbo Kit, Bored .020 over, Port&Polish Head, Cartech RRFPR, JK BBK, Coleman Rotors, Wilwood 4 piston Calipers, Hawk Pads, SS Brake Lines, Brullen 3" Cat & Exhaust, 210cc injectors, Bilstein Shocks/Struts, Eibachs, Braid 16x8 Wheels, Yoko AVS 245/45/16's, Kaminari, Hella H4's, Custom dual rear strut bars, killer sound & much more...SOLD
    '85 4Runner, 8" lift, 5.29 gears, locked F&R, LC Engineering 22-RE, 34" TrXus MTs, ARB Front Bumper, etc. FOR SALE!

  2. Remove Advertisements
    CelicaSupra.com
    Advertisements

  3. #12
    Member
    Join Date
    Mar 2003
    Location
    Northern Colorado
    Posts
    34
    I dunno....$150 shipped for 2.5 sounds like a good deal....hmmm so you have the ability to mandrel bend 3 inch pipe? why not make up a batch of intake pipes? then again you have to weld in the barbs for the hose's and probably source some connecters, etc.....dunno if it can be done for much less then what is already offered....
    '85 SDR P-type Auto
    LJm Bar, Lewitz Bar, Wes Bar, KYB Gr-2 shocks
    Cone filter, Chimpy Intake pipe

  4. #13
    CelicaSupra.com Member
    Join Date
    Apr 2003
    Location
    San Diego, CA
    Posts
    1,051
    I can do a 3" intake pipe. It is not in my favor to do so. To do any mandrel work I have to purchase 10 units up front. Given the success of the Chimp intake pipe I don't see too many people interested in buying the same thing from someone else.

    I will offer a shorty intake pipe though, for those on a budget, very soon.

    From what I'm seeing everybody who wanted a catback bought Brullen and everyone who wants a catback will be making their own. The chimp piping only catback is $225 but I haven't heard of many people buying them?
    85 Supra 7MGE Lightweight

  5. Remove Advertisements
    CelicaSupra.com
    Advertisements

  6. #14
    CelicaSupra.com Member
    Join Date
    Apr 2003
    Location
    San Diego, CA
    Posts
    1,051
    Is there anyone out there that can test out a 2.5" kit for me? You must be able to cut and weld and you must install everything ASAP. I will give you free shipping.
    85 Supra 7MGE Lightweight

  7. #15
    CelicaSupra.com Member
    Join Date
    Apr 2003
    Location
    San Diego, CA
    Posts
    1,051
    any test monkeys out there?
    85 Supra 7MGE Lightweight

  8. #16
    CelicaSupra.com Member Donn29's Avatar
    Join Date
    May 2004
    Location
    Windsor, Ontario
    Posts
    6,312
    im assuming that we pay for it and you ship it, or is it free?
    Supra Rehabilitator.
    Black 86 with 7M-GTE/W58/3.58/TrueTrac, 300whp, [email protected] Now on MS3X.
    Hidden Content Hidden Content Hidden Content Hidden Content Hidden Content Hidden Content
    Hidden Content Originally Posted by Tire Shredder Hidden Content
    "surprise! this one runs 11s biatch"

  9. #17
    CelicaSupra.com Member
    Join Date
    Apr 2003
    Location
    San Diego, CA
    Posts
    1,051
    Are you talking about the test unit?
    85 Supra 7MGE Lightweight

  10. #18
    CelicaSupra.com Member Donn29's Avatar
    Join Date
    May 2004
    Location
    Windsor, Ontario
    Posts
    6,312
    yes the test unit, i assume we pay, u ship, how much?
    Supra Rehabilitator.
    Black 86 with 7M-GTE/W58/3.58/TrueTrac, 300whp, [email protected] Now on MS3X.
    Hidden Content Hidden Content Hidden Content Hidden Content Hidden Content Hidden Content
    Hidden Content Originally Posted by Tire Shredder Hidden Content
    "surprise! this one runs 11s biatch"

  11. #19
    CelicaSupra.com Member
    Join Date
    Apr 2003
    Location
    San Diego, CA
    Posts
    1,051
    you have PM
    85 Supra 7MGE Lightweight

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts