Alloy used in bellhousing
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
WHY do hood/hatch struts fail?
General Tech Q&AI'll guess 2 reasons. The seals leak out the nitrogen. How? The seals fail for 2 reasons. Dirt and HEAT. Under hood temps can be very high and that will affect the pressure inside the struts=VERY high. Plus,the strut is in the collapsed state that increases the pressure even further. I did a...- 17
- 200
-
ddd228 · updated
-
‘85 Supra cranks, won’t start
General Tech Q&AAlright so I picked up a 1985 Supra the other day. Aside from some cosmetics, the only problem, it appears, is that the poor thing won’t start. Before getting mad at me and linking to other threads or the TSRM, know I’ve already been there. I’m curious to see what other people say. I am...- 102
- 2K
-
Timmy1258 · updated
-
This car never ends. Fuel pump time. Any advice on replacing it? External
General Tech Q&ASooo I decided to be good and change the timing belt because it was old and crusty. Everything went great! Did it in about 3 hrs and ran fantastic after. I did some pulls and went home and parked it. Next morning it didnt wanna start. Checked everything and wasnt getting fuel. Jumped the fuel...- 10
- 284
-
82 Lover · updated
-
Fuel pump hanger sending line thread??? (85 p-type)
General Tech Q&AAnyone know what thread size the line is on the fuel pump hanger? Managed not to break the factory line but the nut from the hardline is seized in the end. so for now im going to get some fuel hose and re flare the hardline. Just need to know what thread this thing is so i can get the...- 2
- 130
-
Windshield Sun Screen?
General Tech Q&AI'm needing to get a reflective sun screen to put in my windshield to protect my dash when I'm out. Any recommendations on one that fits well, or am I stuck with generic rectangles?- 6
- 183
-
Speedrye · updated
Join now to ask and comment!