Toyota Celica Supra Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
15,036 Posts
Discussion Starter #1
my friends dad made me a flange for my ct26 that has a 3in outlet. it allows you to make a custom downpipe and eliminate the stock o2 elbow. he can make them for ~$45. if interested lmk. i also have a pic of mine that i can email to anyone that wants to see it. it is high quality.
william


[/url]
 

·
BIG BOSS HOSS
Joined
·
4,460 Posts
williamb82 said:
my friends dad made me a flange for my ct26 that has a 3in outlet. it allows you to make a custom downpipe and eliminate the stock o2 elbow. he can make them for ~$45. if interested lmk. i also have a pic of mine that i can email to anyone that wants to see it. it is high quality.
william
The wastegate wall is still there!
 

·
Registered
Joined
·
15,036 Posts
Discussion Starter #3
yes it is. it has a 3in diameter outlet. that is what has been on my 84 7mgte mkii for over 6 months. no problems with boost creep and with the 60 trim and a worn out actuator spring, it will run as low as 5psi if not shimmed. so if the waste gate can still bypass enough exhaust with this flange to run 5psi on an upgraded ct26 i dont see the problem. im not saying this is the best flange out there, ,just simply offering it to anyone interested. it defineatly improves spool up and overall performance.
william
 

·
Registered
Joined
·
67 Posts
3In. Turbo flange

Is this the downpipe flange?

If so, do we need to send ours to you to get it done?

Your pics didn't show when I looked at the post, so I have no idea if this is part of the downpipe...
 

·
Registered
Joined
·
15,036 Posts
Discussion Starter #7
it is the flange that bolts to the turbo so you can bypass the stock restrictive o2 elbow. it is just the flange and you dont send anything except the payment for the part.
william
 

·
Registered
Joined
·
2,476 Posts
williamb82 said:
it is the flange that bolts to the turbo so you can bypass the stock restrictive o2 elbow. it is just the flange and you dont send anything except the payment for the part.
william
E-mail me a picture of the piece I can't see the one you posted.
 

·
Registered
Joined
·
15,036 Posts
Discussion Starter #9
ill send it when i get home. btw, i can get him to make the flange with no hole in case somone wants a smaller hole. just lmk before hand.
william
 

·
Registered
Joined
·
2,476 Posts
williamb82 said:
ill send it when i get home. btw, i can get him to make the flange with no hole in case somone wants a smaller hole. just lmk before hand.
william
By no hole or smaller hole do you mean the one for the O2 sensor?
 

·
Registered
Joined
·
15,036 Posts
Discussion Starter #11
no, by hole i meant the hole for the outlet. eric's has a 2.5in hole, and my personal flange has a 3in hole. up to you depending on what size exhaust you want to run. youll realize what i mean the min you see the pic.
william
 
1 - 11 of 11 Posts
Top