[williamb82]

my friends dad made me a flange for my ct26 that has a 3in outlet. it allows you to make a custom downpipe and eliminate the stock o2 elbow. he can make them for ~$45. if interested lmk. i also have a pic of mine that i can email to anyone that wants to see it. it is high quality.
william

[/url]

 

[williamb82]

yes it is. it has a 3in diameter outlet. that is what has been on my 84 7mgte mkii for over 6 months. no problems with boost creep and with the 60 trim and a worn out actuator spring, it will run as low as 5psi if not shimmed. so if the waste gate can still bypass enough exhaust with this flange to run 5psi on an upgraded ct26 i dont see the problem. im not saying this is the best flange out there, ,just simply offering it to anyone interested. it defineatly improves spool up and overall performance.
william

 

[williamb82]

it is the flange that bolts to the turbo so you can bypass the stock restrictive o2 elbow. it is just the flange and you dont send anything except the payment for the part.
william

 

[williamb82]

ill send it when i get home. btw, i can get him to make the flange with no hole in case somone wants a smaller hole. just lmk before hand.
william

 

[williamb82]

no, by hole i meant the hole for the outlet. eric's has a 2.5in hole, and my personal flange has a 3in hole. up to you depending on what size exhaust you want to run. youll realize what i mean the min you see the pic.
william