Toyota Celica Supra Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
6,929 Posts
Attatch a clear pastic tube from the valve to the container.
Have some one pump the clutch a couple of times and then hold the clutch down. Open the valve about half a turn, till it stops flowing then close the valve. And repeat till no more air bubbles come out. Make sure the pedal is not released when the bleeder screw is open.

HTH, Laterz zankone
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top